WarmlyYours nspiration Thermostat Environ Wiring Diagram Guide

WarmlyYours inspiration Thermostat Environ Wiring

WIRING DIAGRAM

For 120V & 240V Environ™ Heating Products with nSpire Touch Wi-Fi (UWG4), nSpire Touch (UDG4), nHance (UDG), nTrust (UTN4), nJoin (USG)

ELECTRICAL ROUGH-IN

FACEPLATE REMOVAL

REAR OF THE BASE

1. MAT HAS NO POLARITY
2. COLD LEAD IS 15 FT (30 FT FOR EASY MATS)
3. DO NOT SHORTEN THE MAT
4. DO NOT CUT THE HEATING WIRE
5. ALWAYS TEST OHMS OF ROLE BEFORE, DURING, AND AFTER INSTALLATION
6. ALWAYS TEST THE SENSOR AND VERIFY 15 K OHM RESISTANCE
7. NEVER INSTALL ELECTRIC FLOOR HEATING UNDER PERMANENT FIXTURES
8. THE INSTALLATION MUST COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL AND BUILDING CODES, INCLUDING AUTHORITY HAVING JURISDICTION.

For 120V & 240V Environ™ Heating Products with nSpire Touch Wi-Fi (UWG4), nSpire Touch (UDG4), nHance (UDG), nTrust (UTN4), nJoin (USG) using a junction box

ELECTRICAL ROUGH-IN

FACEPLATE REMOVAL

REAR OF THE BASE

1. MAT HAS NO POLARITY
2. COLD LEAD IS 15 FT (30 FT FOR EASY MATS)
3. DO NOT SHORTEN THE MAT
4. DO NOT CUT THE HEATING WIRE
5. ALWAYS TEST OHMS OF ROLE BEFORE, DURING, AND AFTER INSTALLATION
6. ALWAYS TEST THE SENSOR AND VERIFY  15 K OHM RESISTANCE
7. NEVER INSTALL ELECTRIC FLOOR HEATING UNDER PERMANENT FIXTURES
8. THE INSTALLATION MUST COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL AND BUILDING CODES, INCLUDING AUTHORITY HAVING JURISDICTION.

Installation Support • (800) 875-5285 • www.WarmlyYours.com

REFERENCE

Download Manual

WarmlyYours nSpiration Thermostat Environ wiring Diagram Guide

Other Manual

WarmlyYours nSpiration Thermostat Wiring Diagram Guide

WarmlyYours nSpiration Thermostat Slab Heating Wiring Diagram Guide

WarmlyYours nSpiration Thermostat Tempzone Single Wiring Diagram Guide

WarmlyYours nSpiration Thermostat Tempzone Twin wiring Diagram Guide

WarmlyYours nSpiration Thermostat Environ Wiring Diagram Guide