WarmlyYours nSpiration Thermostat Slab Heating wiring Diagram Guide

WarmlyYours nSpiration Thermostat Slab Heating wiring

WIRING DIAGRAM

For 120V & 240V Slab Heating Products with nSpire Touch Wi-Fi (UWG4), nSpire Touch (UDG4), nHance (UDG), nTrust (UTN4), nJoin (USG)

1. MAT/CABLE HAS NO POLARITY
2. DO NOT CUT THE HEATING WIRE
3. ALWAYS TEST OHMS OF HEATING PRODUCT BEFORE, DURING, AND AFTER INSTALLATION
4. ALWAYS TEST THE SENSOR AND VERIFY 8- 15 K OHM RESISTANCE
5. NEVER INSTALL ELECTRIC FLOOR HEATING UNDER PERMANENT FIXTURES
6. THE INSTALLATION MUST COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL AND BUILDING CODES, INCLUDING AUTHORITY HAVING JURISDICTION.

For 120V & 240V Slab Heating Products with Relay Panel and nSpire Touch Wi-Fi (UWG4), nSpire Touch (UDG4), nHance (UDG), nTrust (UTN4), nJoin (USG)

 

Installation Support • (800) 875-5285 • www.WarmlyYours.com

REFERENCE:

Download Manual:

WarmlyYours nSpiration Thermostat Slab Heating wiring Diagram Guide

Other Manual:

WarmlyYours nSpiration Thermostat Wiring Diagram Guide

WarmlyYours nSpiration Thermostat Environ Wiring Diagram Guide

WarmlyYours nSpiration Thermostat Tempzone Single Wiring Diagram Guide

WarmlyYours nSpiration Thermostat Tempzone Twin wiring Diagram Guide

WarmlyYours nSpiration Thermostat Slab Heating Wiring Diagram Guide