WarmlyYours nSpiration Thermostat Tempzone Single wiring Diagram Guide

Contents hide

WarmlyYours nSpiration Thermostat Tempzone Single wiring

WarmlyYours-nSpiration-Thermostat-Tempzone-Single-wiring-Diagram-Guide-product

For 120V & 240V Single Conductor TempZone with nSpire Touch Wi-Fi (UWG4), nSpire Touch (UDG4), nHance (UDG), nTrust (UTN4), nJoin (USG)

ELECTRICAL ROUGH-IN

WarmlyYours-nSpiration-Thermostat-Tempzone-Single-wiring-Diagram-Guide-fig-1

FACEPLATE REMOVAL

WarmlyYours-nSpiration-Thermostat-Tempzone-Single-wiring-Diagram-Guide-fig-2

WarmlyYours-nSpiration-Thermostat-Tempzone-Single-wiring-Diagram-Guide-fig-3

MAT HAS NO POLARITY
RED OR YELLOW INDICATORS ON COLD LEAD INDICATE THE “BEGINNING” OF THE MAT. WHITE INDICATORS SIGNIFY THE “END” OF THE MAT
COLD LEAD IS 13” AT “THE BEGINNING” OF THE MAT, AND 26’ AT “END” OF THE MAT (20’ & 40’ LEADS ON 3’ WIDE MATS)
ENSURE THAT ALL COLD LEADS PRESENT IN THE THERMOSTAT BOX ARE THE SAME DIAMETER
DO NOT SHORTEN THE MAT
DO NOT CUT THE HEATING WIRE
ALWAYS TEST OHMS OF ROLE BEFORE, DURING, AND AFTER INSTALLATION
ALWAYS TEST THE SENSOR AND VERIFY 8-15 K OHM RESISTANCE
NEVER INSTALL ELECTRIC FLOOR HEATING UNDER PERMANENT FIXTURES
THE INSTALLATION MUST COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL AND BUILDING CODES, INCLUDING AUTHORITY HAVING JURISDICTION.

Installation Support • (800) 875-5285 • www.WarmlyYours.com