WarmlyYours inspiration Thermostat Environ Wiring
WIRING DIAGRAM
For 120V & 240V Environ™ Heating Products with nSpire Touch Wi-Fi (UWG4), nSpire Touch (UDG4), nHance (UDG), nTrust (UTN4), nJoin (USG)
ELECTRICAL ROUGH-IN
FACEPLATE REMOVAL
REAR OF THE BASE
- MAT HAS NO POLARITY
- COLD LEAD IS 15 FT (30 FT FOR EASY MATS)
- DO NOT SHORTEN THE MAT
- DO NOT CUT THE HEATING WIRE
- ALWAYS TEST OHMS OF ROLE BEFORE, DURING, AND AFTER INSTALLATION
- ALWAYS TEST THE SENSOR AND VERIFY 15 K OHM RESISTANCE
- NEVER INSTALL ELECTRIC FLOOR HEATING UNDER PERMANENT FIXTURES
- THE INSTALLATION MUST COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL AND BUILDING CODES, INCLUDING AUTHORITY HAVING JURISDICTION.
For 120V & 240V Environ™ Heating Products with nSpire Touch Wi-Fi (UWG4), nSpire Touch (UDG4), nHance (UDG), nTrust (UTN4), nJoin (USG) using a junction box
ELECTRICAL ROUGH-IN
FACEPLATE REMOVAL
REAR OF THE BASE
MAT HAS NO POLARITY- COLD LEAD IS 15 FT (30 FT FOR EASY MATS)
- DO NOT SHORTEN THE MAT
- DO NOT CUT THE HEATING WIRE
- ALWAYS TEST OHMS OF ROLE BEFORE, DURING, AND AFTER INSTALLATION
- ALWAYS TEST THE SENSOR AND VERIFY 15 K OHM RESISTANCE
- NEVER INSTALL ELECTRIC FLOOR HEATING UNDER PERMANENT FIXTURES
- THE INSTALLATION MUST COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL AND BUILDING CODES, INCLUDING AUTHORITY HAVING JURISDICTION.
Installation Support • (800) 875-5285 • www.WarmlyYours.com
REFERENCE
Download Manual
WarmlyYours nSpiration Thermostat Environ wiring Diagram Guide
Other Manual
WarmlyYours nSpiration Thermostat Wiring Diagram Guide
WarmlyYours nSpiration Thermostat Slab Heating Wiring Diagram Guide
WarmlyYours nSpiration Thermostat Tempzone Single Wiring Diagram Guide
WarmlyYours nSpiration Thermostat Tempzone Twin wiring Diagram Guide
WarmlyYours nSpiration Thermostat Environ Wiring Diagram Guide
Leave a Reply