Category: Secure

  • Secure SEC_SCS318 Room and Time Control Thermostat Quick Start Guide

    Secure SEC_SCS318 Room and Time Control Thermostat Quick Start Guide

    Secure SEC_SCS318 Room and Time Control Thermostat    Quick Start A This devices are wireless Actors. SCS317: To confirm inclusion and exclusion do the following steps: 2 x Enter to start menu; use the right arrow key and open the menu “Setup”; use right arrow key and open menu “Set up Z-Wave”; use right arrow…

  • Secure SEC_SIR321 Z-Wave thermostat Product Specification Guide

    Secure SEC_SIR321 Z-Wave thermostat Product Specification Guide

    Secure SEC_SIR321 Z-Wave Thermostat   INTRODUCTION The new stylish range of digital timer controls SIR 020, SIR 021 and SIR 022 are simple push-button switches that remember to switch off electrical appliances – so you don’t need to. Big energy savings are possible by adding this simple device to any high-powered electrical appliance, with loads up…

  • Secure SEC_SIR321 Z-Wave thermostat Installational Manual

    Secure SEC_SIR321 Z-Wave thermostat Installational Manual

    Secure SEC_SIR321 Z-Wave thermostat  Introduction SIR 321 is a Z-Wave® countdown timer that can be used to control immersion heater elements or other electrical appliances rated up to 3 kW. SIR 321 uses Z-Wave radio frequency technology to communicate with network controllers from Secure or other manufacturers. It is a mains-powered device that can also…

  • Secure SEC_SIR321 Z-Wave thermostat Quick Start Guide

    Secure SEC_SIR321 Z-Wave thermostat Quick Start Guide

    Secure SEC_SIR321 Z-Wave thermostat  Quickstart This is a Central Controller for Europe. To run this device please connect it to your mains power supply. To add this device to your network execute the following action: Press and hold the” pairing button on the unit until the RF LED starts” flashing at a fast rate. Then…

  • Secure SEC_SSR303 Z-Wave thermostat Installational Manual

    Secure SEC_SSR303 Z-Wave thermostat Installational Manual

    Secure SEC_SSR303 Z-Wave thermostat  Quickstart This is a Z-Wave Device for Europe. To run this device please connect it to your mains power supply. To confirm inclusion and exclusion push and hold the network button until the “ON” LED starts flashing. Important safety information Please read this manual carefully. Failure to follow the recommendations in…

  • Secure SEC_STP328 Timer Controlled Thermostat Quick Start Guide

    Secure SEC_STP328 Timer Controlled Thermostat Quick Start Guide

    Secure SEC_STP328 Timer Controlled Thermostat  Quick Start This is a wireless Actor. For Inclusion and Exclusion press and hold both white buttons on the device until the LED starts flashing. (green ->Inclusion, red -> Exclusion) Please refer to the chapters below for detailed information about all aspects of the usage of the product. What is…

  • Secure SEC_SSR303 Z-Wave thermostat Quick Start Guide

    Secure SEC_SSR303 Z-Wave thermostat Quick Start Guide

    Secure SEC_SSR303 Z-Wave thermostat  Quick start This is a Z-Wave Device for Europe. To run this device please connect it to your mains power supply. To confirm inclusion and exclusion push and hold the network button until the “ON” LED starts flashing. What is Z-Wave? Z-Wave is the international wireless protocol for communication in the…

  • Secure SEC_SSR302 Z-Wave thermostat Quick Start Guide

    Secure SEC_SSR302 Z-Wave thermostat Quick Start Guide

    Secure SEC_SSR302 Z-Wave thermostat   Quick Start A This is a wireless Actor. For Inclusion and Exclusion press and hold both white buttons on the device until the LED starts flashing. (green ->Inclusion, red -> Exclusion) Please refer to the chapters below for detailed information about all aspects of the usage of the product. What is…

  • Secure SEC_SES301  Z-Wave thermostat  User Manual

    Secure SEC_SES301 Z-Wave thermostat User Manual

    Secure SEC_SES301 Z-Wave thermostat  Z-Wave® Commissioning Notes SES 301 is a battery-powered temperature sensor that uses Z-Wave® technology low signals to transmit temperature data to a Controller. SES 301 does not need any wiring, but we recommend that it should be installed by a qualified electrician with current approval under Part P of the UK…

  • Secure SEC_SES301 Z-Wave thermostat Installational Instruction

    Secure SEC_SES301 Z-Wave thermostat Installational Instruction

    Secure SEC_SES301 Z-Wave thermostat  Introduction SES301 is a battery-powered temperature sensor that uses Z-Wave® technology low-power radio signals to transmit temperature data to a Controller. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All constantly powered nodes within the network will…

  • Secure SEC_ESRT321-5 Z-Wave Thermostat Quick Start Guide

    Secure SEC_ESRT321-5 Z-Wave Thermostat Quick Start Guide

    Secure SEC_ESRT321-5 Z-Wave Thermostat Quickstart This is a Z-Wave Device for Europe. To run this device please insert fresh 2 * AAA LR3 batteries. Please make sure the internal battery is fully charged. For Inclusion of Z-Wave devices into the thermostats network do the following steps: Set DIL switch 1 on the back of the…