Category: SCHNEIDER ELECTRIC

  • Schneider Electric 2218 Pneumatic Room Thermostats User Manual

    Schneider Electric 2218 Pneumatic Room Thermostats User Manual

    Schneider Electric 2218 Pneumatic Room Thermostats  Application The 2218 Series Pneumatic Room Thermostats are designed for proportional control of pneumatic valves and damper actuators in environmental control systems where a dual-pressure air main is utilized for seasonal changeover of heating and cooling functions. Their design incorporates a highly sensitive, bimetal, thermostatic element, and a pilot-operated…

  • Schneider Electric LSSMTH07NS Glass Touch Panels Thermostat Product Specification Guide

    Schneider Electric LSSMTH07NS Glass Touch Panels Thermostat Product Specification Guide

    Schneider Electric LSSMTH07NS Glass Touch Panels Thermostat Elevate the guest experience with elegant aesthetics and intuitive control Schneider Electric offers beautifully designed glass panels with an intuitive touch-screen interface to enable guests to control room temperature, lighting, curtains, services, and more for a best-in-class guest experience. Our complete line of Glass Touch Panels is highly…

  • Schneider Electric WDE004478 Programmable thermostat Operating Instruction

    Schneider Electric WDE004478 Programmable thermostat Operating Instruction

    Schneider Electric WDE004478 Programmable thermostat Reference Download Manual: Schneider Electric WDE004478 Programmable thermostat Operating Instruction Schneider Electric WDE004478 Programmable thermostat Operating Instruction

  • Schneider Electric CCT15834 programmable thermostat User Guide

    Schneider Electric CCT15834 programmable thermostat User Guide

    Schneider Electric CCT15834 programmable thermostat Getting to know The programmable thermostat The THP1+ 1C thermostat is intended for time-dependent monitoring and control of the room temperature. Displays and operating elements A Display of active keys B Days of the week display C Time display D Date display E Programmed ON times F Operating mode G…

  • Schneider Electric CCTFR6100Z3 Wiser Radiator Thermostat User Guide

    Schneider Electric CCTFR6100Z3 Wiser Radiator Thermostat User Guide

    Schneider Electric CCTFR6100Z3 Wiser Radiator Thermostat  Legal Information The Schneider Electric brand and any trademarks of Schneider Electric SE and its subsidiaries referred to in this guide are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owners. This guide and its content are protected under…

  • Schneider Electric WDE004889 Touch display thermostat Operational Manual

    Schneider Electric WDE004889 Touch display thermostat Operational Manual

    Schneider Electric WDE004889 Touch display thermostat   Accessories WDE002495 Floor Sensor For operating the thermostat in the floor and dual mode For your safety Risk of fatal injury due to electrical current All work on the device should only be carried out by trained and skilled electricians. Observe the country-specific regulations Thermostat introduction With the Touch…

  • Schneider Electric CCTFR6100Z3 Wiser Radiator Thermostat User Manual

    Schneider Electric CCTFR6100Z3 Wiser Radiator Thermostat User Manual

    Schneider Electric CCTFR6100Z3 Wiser Radiator Thermostat  About this product The Wiser radiator thermostat (hereinafter referred to as thermostat) uses integrated temperature sensors to control the flow of water through a radiator, thereby regulating the temperature in a room. The target temperature and switching times are set in the Wiser App. Package contents Radiator Thermostat O-ring…

  • SCHNEIDER ELECTRIC TC-195 Two Position Electric Room Thermostats Instructions Guide

    SCHNEIDER ELECTRIC TC-195 Two Position Electric Room Thermostats Instructions Guide

    SCHNEIDER ELECTRIC TC-195 Two Position Electric Room Thermostats Application These units are used for on-off control of line voltage fan coil or zone valves on heating, cooling, and heating and cooling systems. A two-pole, three-position switch is provided for fan control. Features  Separate units for °C and °F. Parallel heat and/or cooling anticipation capability. Dial…

  • SCHNEIDER ELECTRIC TC300 Thermostat Installation Instructions

    SCHNEIDER ELECTRIC TC300 Thermostat Installation Instructions

    SCHNEIDER ELECTRIC TC300 Thermostat Features Modern appearance Large, blue backlit, LCD screen Eco button for energy saving Real-time display Button lockout function controls the unauthorized operation Non-volatile memory (EEPROM) retains user settings during power loss Low-temperature protection Standard 86×86 mm box for installation Alert function facilitates temperature sensor maintenance Optional Modbus communication Deluxe models include:…

  • SCHNEIDER ELECTRIC TC300 Thermostat Specification Sheet

    SCHNEIDER ELECTRIC TC300 Thermostat Specification Sheet

    SCHNEIDER ELECTRIC TC300 Thermostat  Product Description The TC300 Series fan coil thermostats are optimised for office building, hotel and residential applications. The TC300 Series can be used for 2-pipe or 4-pipe applications. Their simple design makes them suitable for any contemporary building. They are both easy to operate and install. The TC300 features microprocessor-based control…

  • SCHNEIDER ELECTRIC SE8600 thermostat Installation Guide

    SCHNEIDER ELECTRIC SE8600 thermostat Installation Guide

    SCHNEIDER ELECTRIC SE8600 thermostat   INSTALLATION Location Do not install it on the outside wall. Do not install in areas with a direct heat source. Do not install near any air discharge grill. Do not install in areas exposed to direct sunlight. Ensure Controller has sufficient air circulation. Ensure the wall surface is flat and clean.…

  • SCHNEIDER ELECTRIC SE8650 Thermostat User Guide

    SCHNEIDER ELECTRIC SE8650 Thermostat User Guide

    SCHNEIDER ELECTRIC SE8650 Thermostat  Safety Information IMPORTANT INFORMATION Read these instructions carefully and inspect the equipment to become familiar with the device before trying to install, operate, service or maintain it. The following special messages may appear throughout this bulletin or on the equipment to warn of potential hazards or to call attention to information…

  • SCHNEIDER ELECTRIC SE7600 thermostat Installation Guide

    SCHNEIDER ELECTRIC SE7600 thermostat Installation Guide

    SCHNEIDER ELECTRIC SE7600 thermostat INSTALLATION Preparation Remove the security screw on the bottom of Terminal Equipment Controller cover. Open unit by pulling on the bottom side of Terminal Equipment Controller (Fig. 1). Remove wiring terminals from sticker. Please read the FCC ID and IC label installed in the cover upon removal of cover for the…

  • SCHNEIDER ELECTRIC SE8650 Thermostat Installation Guide

    SCHNEIDER ELECTRIC SE8650 Thermostat Installation Guide

    SCHNEIDER ELECTRIC SE8650 Thermostat Roof Top Unit (RTU), Heat Pump and Indoor Air Quality (IAQ) Firmware Revision 2.5.1 SAFETY INFORMATION IMPORTANT INFORMATION Read these instructions carefully and inspect the equipment to become familiar with the device before trying to install, operate, service or maintain it. The following special messages may appear throughout this bulletin or…

  • SCHNEIDER ELECTRIC WTH-16 Programmable Thermostat Operating Instructions

    SCHNEIDER ELECTRIC WTH-16 Programmable Thermostat Operating Instructions

    SCHNEIDER ELECTRIC WTH-16 Programmable Thermostat Accessories WDE002495 Floor Sensor For operating the thermostat on the floor and dual mode. For your safety DANGER Risk of serious damage to property and personal injury, e.g. from fire or electric shock, due to incorrect electrical installation. The safe electrical installation can only be ensured if the person in…

  • SCHNEIDER ELECTRIC SE7600F Thermostat Installation Guide

    SCHNEIDER ELECTRIC SE7600F Thermostat Installation Guide

    SCHNEIDER ELECTRIC SE7600F Thermostat INSTALLATION Inspection Remove the security screw on the bottom of the Terminal Equipment Controller cover. Open the unit by pulling on the bottom side of Terminal Equipment Control-ler (Figure-1). Remove the wiring terminals from the sticker. Please read the FCC ID and IC label installed in the cover upon removal of…

  • SCHNEIDER ELECTRIC SE7200 thermostat Installation Guide

    SCHNEIDER ELECTRIC SE7200 thermostat Installation Guide

    SCHNEIDER ELECTRIC SE7200 thermostat INSTALLATION Preparation Remove the security screw on the bottom of Terminal Equipment Controller cover. Open unit by pulling on the bottom side of Terminal Equipment Controller (Fig. 1). Remove wiring terminals from sticker. Please read the FCC ID and IC label installed in the cover upon removal of cover for the…

  • SCHNEIDER ELECTRIC SE7600F Thermostat Product Specification Guide

    SCHNEIDER ELECTRIC SE7600F Thermostat Product Specification Guide

    SCHNEIDER ELECTRIC SE7600F Thermostat Roof top terminal equipment controllers for modulating heat Introduction Maintaining fresh air requirements for buildings located in colder climates has always been a challenge. In low outdoor air temperature conditions, supply air is often too cold to be used directly without conditioning when no heating demand is present. This creates an…

  • SCHNEIDER ELECTRIC SE7200 Thermostat Product Specification Guide

    SCHNEIDER ELECTRIC SE7200 Thermostat Product Specification Guide

    SCHNEIDER ELECTRIC SE7200 Thermostat INTRODUCTION Smart energy management has never been easier than with the SE7200 series. Designed for new construction or retrofit projects, the controllers dramatically decrease total installed costs by reducing installation, configuration and commissioning time. The SE7200 series provides the advanced features and monitoring functions required by modern building automation systems without…

  • SCHNEIDER ELECTRIC SE7600 Thermostat Product Specification Guide

    SCHNEIDER ELECTRIC SE7600 Thermostat Product Specification Guide

    SCHNEIDER ELECTRIC SE7600 Thermostat INTRODUCTION Smart energy management has never been easier than with the SE7600 series rooftop and heat pump temperature controllers. Designed for new construction and retrofit projects, the controllers dramatically decrease total installed costs by reducing installation, configuration, and commissioning time. No complex software or tools are required to customize functionality to…

  • SCHNEIDER ELECTRIC MN-S1 Thermostat Installation Instruction

    SCHNEIDER ELECTRIC MN-S1 Thermostat Installation Instruction

    SCHNEIDER ELECTRIC MN-S1 Thermostat DIMENSIONS ASSEMBLY Distributed, manufactured, and sold by TAC. I/A SERIES trademarks are owned by Invensys Systems, Inc. and are used on this product under a master license from Invensys. Invensys does not manufacture this product or provide any product warranty or support. For service, support, and warranty information, contact TAC at…

  • SCHNEIDER ELECTRIC MN-S1 Thermostat Instruction Guide

    SCHNEIDER ELECTRIC MN-S1 Thermostat Instruction Guide

    SCHNEIDER ELECTRIC MN-S1 Thermostat   Application I/A Series MicroNet Sensors are wall-mounted digital temperature and humidity sensors for use with I/A Series MicroNet Controllers. These sensors feature a Sensor Link (S-Link) communication protocol that provides a simple two-wire interface for power and exchange of sensor and subbase information. Available in twelve models, these I/A Series…