TM1-50 is an electronic room thermostat for wall mounting. The thermostat has settable hysteresis and a change-over relay output. It uses 230 V AC supply voltage.
TM1-50 is suitable for controlling cooling coils, fan heaters, fans, DX cooling, solenoid valves, fan-coil units, etc. It is especially well suited for the control of ventilation fans in elevator motor rooms, as well as in transformer rooms where adjustable hysteresis is often required.
External sensor
An external sensor from Regin´s NTC series can be connected if the thermostat cannot be mounted at the desired location. Visit Regin’s website at www.regincontrols.com. for a suitable sensor
Setpoint
The set point is set using the wheel on the side of the thermostat. In order to prevent tampering, the setpoint wheel can be locked by means of a locking screw under the cover.
Mounting
CE
This product carries the CE mark. More information is available at www.regincontrols.com.
Product Documentation
The product documentation can be downloaded from www.regincontrols.com
HEAD OFFICE SWEDEN
DOWNLOAD MANUALS:
REGIN TM1-50 Electronic Room Thermostat Product Data Sheet
OTHER MANUALS:
REGIN TM1-50 Electronic Room Thermostat INSTRUCTION MANUAL
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…