SCHNEIDER ELECTRIC SE7600F Thermostat
Roof top terminal equipment controllers for modulating heat
Introduction
Maintaining fresh air requirements for buildings located in colder climates has always been a challenge. In low outdoor air temperature conditions, supply air is often too cold to be used directly without conditioning when no heating demand is present. This creates an uncomfortable environment for occupants that is difficult to control. The new Schneider Electric™ SE7600F Series roof top terminal equipment controller with modulating heat makes your building more comfortable while still meeting ventilation codes for minimum building fresh air requirements. The SE7600F is easy to install and includes modulating heat functionality. This allows for the addition of an extra supply air temperature control loop to better control and condition the supply air levels, providing a more comfortable occupant environment. This easy-to-install wall-mounted SE7600F room controller features an easy-to-read digital display and built-in commissioning and configuration utility, temperature sensor, optional humidity sensor, and optional passive infrared (PIR) occupancy sensor cover. Open protocol design provides compatibility to BACnet® MS/TP and wireless ZigBee® network systems. Our network ready “stand-alone” versions can be field retrofit with optional communication modules that enable the SE7600F to be integrated into virtually any building automation system as building requirements change. No previous building automation training is required for the easy installation and commissioning process. Installation can be completed in fifteen minutes.
Features and Benefits
| Features | Benefits |
| Function with any open protocols | Allows for easy integration into any network system, such as BACnet, ZigBee |
| Network ready units can be retrofit in the field with optional communication modules | Easy network setup and integration at any time |
| One simple wall-mounted device to install, wire, and commission | Lower total installed cost |
| Application-specific controllers | Can be configured to meet most-used applications |
| No special software required for configuration | Lower costs associated with configuration |
| Fully embedded local configuration utility | Provides quicker and less expensive setup |
| Factory-installed passive infrared (PIR) occupancy sensor | Provides additional automatic energy savings |
| Advanced occupancy and monitoring functions | Allows for more flexible energy savings |
| Available with 7-day scheduling | Allows for scheduling functions even in standalone models |
| Available with economiser or humidity control strategies | Allows for free cooling to be used and improves overall comfort |
Typical application
SE7600E Series ordering matrix
References:
Download Manual
SCHNEIDER ELECTRIC SE7600F thermostat Product Specification Guide
OTHER MANUAL
SCHNEIDER ELECTRIC SE7600F thermostat Installation Guide
SCHNEIDER ELECTRIC SE7600F Thermostat Product Specification Guide
Leave a Reply