The iT500 controls your heating and hot water from anywhere via your smartphone or laptop. Your pc and laptop connects to the system using existing broadband connection. The system is wireless so it’s easy to instal.
FEATURES:
Box contains:
This product complies with the following EU Directives: Electromagnetic Compatibility 2014/30/EU, Low Voltage Directive 2014/35/EU, Directive 2014/53/EU and 2011/65/EU. Full information is available on the website www.saluslegal.com
Safety information
Use in accordance with national and EU regulations. Use the device only as intended, keeping it in a dry condition. The product is for indoor use only. Installation must be carried out by a qualified person in accordance with national and EU regulations.
Inserting the batteries in the iT500 Thermostat
Download the iT500 Plus app, create an account and register your device. Follow the on screen instructions to complete all the steps.
Features available only on the App:
Installation of wall bracket docking (optional)
For best results mount iT500 1.5m from ground level.
Desk mount option iT500
For the desk mounted option, simply clip the clear stand supplied separately into the back of the unit.
iT500RX terminals description
Terminal name | Function | |
L,N | 230V AC power supply | |
CH (zone 1) | NC | Normally closed terminal |
NO | Normally open terminal | |
COM | Common Terminal | |
AUX (zone 2) or | NC | Normally closed terminal |
NO | Normally open terminal | |
COM | Common Terminal |
Wiring diagrams for single heating zone
Wiring diagram for 2 heating zones
Note: Always shut off the AC mains supply before installing or working on any components.
Fitting the wall bracket and mounting the iT300
Note: iT300 purchased separately. Can only be used if your system supports second central heating zone
After powering up iT500 for the first time the display will go through the following sequence.
FAILSAFE MODE: In the event of RF signal loss, your system will be switched on for 4 minutes, then off for 11 minutes. If you want to disable FAILSAFE MODE when RF link has been lost then move the slide switch on iT500RX to either the Manual or Off position.
Note: iT300 purchased separately. Can only be used if your system supports second central heating zone.
Note: Please note the red LED on the iT300 will continue to flash and eventually timeout.
This menu should only be entered by the installer as changes can have a detrimental effect on your heating system.
At any time press
The countries marked with * do not observe Daylight Saving Time. For details please see below.
DST (Daylight Saving Time) ON will automatically change your time from summer to winter.
When connected to the internet, the iT500 will set time and date automatically. However this can also be set manually.
Note: If you set the temperature in AUTO mode (temporary override) the setpoint temperature won’t be changed until the next program starts.
To enable or disable lock function press and hold
You can easily set your schedule via iT500 Plus app
In iT500 thermostat you can define 6 schedule programs per day. You can set different temperature level for each program. While programming specific time interval you must be aware that you are about to set at what time the program will start. For example, if you set program 1 for 6:00 (AM) it means the program is going to run at 6:00 (AM) and will running till the time set for next program. Example of 4 temperature levels for 6 schedule programs:
Note: When you set program schedule, necessarily set all 6 programs. I.e. if you want to set 2 temperature levels, you need to set first temperature level for 1 to 5 program and set second temperature level only for program 6.
Note: In the program schedule for the hot water system (HW)
Download Manual:
SALUS IT500 Internet thermostat Quick Guide
OTHER MANUALS
SALUS IT500 Internet thermostat User Manual
SALUS IT500 Internet thermostat Installational Manual
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…