Ritetemp

Ritetemp 6010 Non-Programmable Thermostat Operational Manual

Ritetemp 6010 Non-Programmable Thermostat

PRODUCT OVERVIEW

Once you have installed the thermostat, follow the instructions below to operate your new thermostat.

Configure

Set the HEAT/COOL mode switch to HEAT or COOL. Set the Fan switch to AUTO (automatic).

Statement of use: The 6010 can be used with most 24-volt gas, oil or electric heating systems, zoned heating systems, heat pumps with or without auxiliary heat, or gas millivolt heating systems. It cannot be used with 120-volt heating systems.

Set Temp

Turn the Temperature control to select the desired temperature.

  • Warmer – to the right
  • Cooler – to the left.

Operate

  • Your thermostat is now in operation.
  • In the winter, set the mode switch to HEAT to control your heating system.
  • In the summer, set the mode switch to COOL to control your air conditioner.
  • In spring and fall or when windows are open, you can set the mode switch OFF.
  • Setting the FAN switch to AUTO automatically runs your system’s fan during heating and cooling.
  • Setting the FAN switch to ON runs your system’s fan continuously even without heating or cooling.
    NOTE: LED blinks when batteries are low.
    Caution: System will stop when batteries die.

Heat Pump EMER Switch

NOTE: If you have a HEAT PUMP with Board auxiliary heat this section applies to your system.

If your Heat Pump malfunctions or cannot maintain your desired temperature you may occasionally need to access the EMER position on the mode switch. This enables your auxiliary heat source and will continue until you turn it off.

  • This is done by lifting the EMER latch and moving the mode switch to the EMER position.
  • Return the mode switch to HEAT position as soon as the heat pump is again available. Auxiliary heat is more expensive to use.

Customer Support: 877-505-2353
or Visit our website www.ritetemp-thermostats.com
Printed in China

REFERENCE:

DOWNLOAD MANUALS:

Ritetemp 6010 Non-Programmable Thermostat Operational Manual

OTHER MANUALS:

Ritetemp 6010 non-programmableThermostat Installational Guide

Ritetemp 6010 Non-Programmable Thermostat Operational Manual

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago