Nuheat Home Touchscreen Programmable Thermostat 240V Relay General Wiring Guide

Nuheat Home Touchscreen Programmable Thermostat 240V Relay General Wiring

 

SIGNATURE, HOME, ELEMENT THERMOSTATS

Terminals for the floor sensor are located on the FRONT side of the thermostat base (not illustrated). Wires of the floor sensor go into terminals C and D only (no polarity). nVent NUHEAT assumes no responsibility for field wiring. please consult a certified electrician for further instruction if needed. Wiring must be in accordance with national and local electrical codes. Wiring methods may differ for each control, please consult Manufacturer’s instructions for actual specifications.

North America
Tel: 1.800.778.9276
Fax: 1.604.529.4404
res.customercare@nVent.com

©2019 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice. NUHEAT-DS-H59661-SignatureHomeElementWiring-EN-1907

REFERENCE:

Download Manual:

Nuheat Home Touchscreen Programmable Thermostat 240V Relay General Wiring Guide

Other Manual:

Nuheat Home Touchscreen Programmable Thermostat Operating Manual

Nuheat Home Touchscreen Programmable Thermostat Data Sheet Guide

Nuheat Home Touchscreen Programmable Thermostat Data Sheet Guide

Nuheat Home Touchscreen Programmable Thermostat 120V Relay Wiring Guide

Nuheat Home Touchscreen Programmable Thermostat 240V Relay Wiring Guide

Nuheat Home Touchscreen Programmable Thermostat 240V Relay General Wiring Guide