Nuheat Home Touchscreen Programmable Thermostat 240V Relay General Wiring Guide

Contents hide

1 Nuheat Home Touchscreen Programmable Thermostat 240V Relay General Wiring

Nuheat Home Touchscreen Programmable Thermostat 240V Relay General Wiring

Nuheat-Home-Touchscreen-Programmable-Thermostat-240V-Relay-General-Wiring-Guide-product

SIGNATURE, HOME, ELEMENT THERMOSTATS

Terminals for the floor sensor are located on the FRONT side of the thermostat base (not illustrated). Wires of the floor sensor go into terminals C and D only (no polarity). nVent NUHEAT assumes no responsibility for field wiring. please consult a certified electrician for further instruction if needed. Wiring must be in accordance with national and local electrical codes. Wiring methods may differ for each control, please consult Manufacturer’s instructions for actual specifications.

North America
Tel: 1.800.778.9276
Fax: 1.604.529.4404
[email protected]

©2019 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice. NUHEAT-DS-H59661-SignatureHomeElementWiring-EN-1907