Nuheat Home Touchscreen Programmable Thermostat 120V Relay Wiring Guide

Nuheat Home Touchscreen Programmable Thermostat 120V Relay Wiring

RELAY SWITCH OR CONTACTOR FOR 120V
This switch allows you to control multiple circuits with a single control. It may be conveniently located inside an electrical junction box. EVENT NUHEAT FLOOR HEATING CONTROL WITH G.F.C.I. See the diagram for wiring instructions.

WIRING INSTRUCTIONS FOR RELAY (120V)
0 – Line 1 from the control
1 – Neutral wire from the control

• 2 – Line 1 feed from panel (CCT #2) 6 – Line 2 feed from panel (CCT #3)
• 4 – Line 1 (Black) to nVent NUHEAT 8 – Line 2 (Black) to nVent NUHEAT

Note: Do not connect neutral wires from different circuits together.

nVent NUHEAT assumes no responsibility for field wiring. Please consult a certified electrician for further instruction if needed. Wiring must be in accordance with national and local electrical codes. Wiring methods may differ for each control, please consult the manufacturer’s instructions for actual specifications.
North America
Tel: 1.800.778.9276
Fax: 1.604.529.4404
res.customercare@nVent.com

REFERENCE

Download Manual

Nuheat Home Touchscreen Programmable Thermostat 240V Relay Wiring Guide

Other Manual

Nuheat Home Touchscreen Programmable Thermostat Operating Manual

Nuheat Home Touchscreen Programmable Thermostat Data Sheet Guide

Nuheat Home Touchscreen Programmable Thermostat Data Sheet Guide

Nuheat Home Touchscreen Programmable Thermostat 240V Relay Wiring Guide

Nuheat Home Touchscreen Programmable Thermostat 240V Relay General Wiring Guide

Nuheat Home Touchscreen Programmable Thermostat 120V Relay Wiring Guide