Using a Wired Thermostat
On the Wireless Thermostat, press and hold the set button until the device beeps.
On the Wired Thermostat, press and hold the set button until the Wired Thermostat double beeps.
The wireless Thermostat setup is complete.
Follow the instructions below to change the temperature mode of your thermostat.
You can control vintage millivolt heaters with the INSTEON Wireless Thermostat if you replace the mercury float or battery-powered thermostat with an IO Module*.
Wireless Thermostat requires at least one Dual-Band INSTEON device to communicate with IO Module.
Controlling Line Voltage Heaters
You can control a line voltage heater with the INSTEON Wireless Thermostat if you replace the line voltage thermostat with an INSTEON Micro Module.
Protected under U.S. and foreign patents (see www.insteon.com/patents) ©2014 INSTEON RAW-#### Rev 02.26.14 ©2014 INSTEON
DOWNLOAD MANUALS:
INSTEON 2441ZTH Wireless Thermostat Quick Start Guide
OTHER MANUALS:
INSTEON 2441ZTH Wireless Thermostat Owners Manual
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…