INSTEON 2441ZTH Wireless Thermostat
INSTEON Wireless Thermostat
Battery Compartment
Using a Wired Thermostat
On the Wireless Thermostat, press and hold the set button until the device beeps.
On the Wired Thermostat, press and hold the set button until the Wired Thermostat double beeps.
The wireless Thermostat setup is complete.
Use ºF or ºC
Follow the instructions below to change the temperature mode of your thermostat.
Controlling Millivolt Heaters
You can control vintage millivolt heaters with the INSTEON Wireless Thermostat if you replace the mercury float or battery-powered thermostat with an IO Module*.
Wireless Thermostat requires at least one Dual-Band INSTEON device to communicate with IO Module.
Controlling Line Voltage Heaters
You can control a line voltage heater with the INSTEON Wireless Thermostat if you replace the line voltage thermostat with an INSTEON Micro Module.
Protected under U.S. and foreign patents (see www.insteon.com/patents) ©2014 INSTEON RAW-#### Rev 02.26.14 ©2014 INSTEON
REFERENCE:
DOWNLOAD MANUALS:
INSTEON 2441ZTH Wireless Thermostat Quick Start Guide
OTHER MANUALS:
INSTEON 2441ZTH Wireless Thermostat Owners Manual
