The Bosch Alexa and Google Home Connected Control Wi-Fi Thermostat can help you save money and energy. By speaking to the Alexa smart device, you may easily change the temperature of your house. While you’re gone from home, the touchscreen thermostat with a 5-inch full-color display automatically switches on and off. You can choose a temperature for various times of the day using comfort settings and intelligent scheduling without having to worry about your home being too hot or cold while you are away. It is Easily connected to Wi-Fi and checks the outside temperature to monitor your home’s temperature all day long. Date, time, temperature control, humidity management, fan operation, and general mode are all available on the touch screen’s main menu.
Any smartphone or tablet can be used to view the main interface and configure the thermostat. The Bosch Thermostat works with any 24 VAC HVAC system, as well as any humidifier or dehumidifier, that is available on the market. The unit must have a C-wire (common wire) to be powered. The C-wire is present on the majority of HVAC systems today that have three or more wires and is used to power the thermostat. If a C-wire is absent, third-party aftermarket items can be used to add powering alternatives. has a 5-year manufacturer warranty. The thermostat can control both evaporative and steam-type external humidifier accessories thanks to the humidifier algorithm update.
When linked to devices with a Hot Gas Reheat coil, such as a Bosch Water Source Heat Pump, the Dehumidifier Algorithm update incorporates Hot Gas Reheat compatibility that enables the thermostat to achieve the humidity set point. When employing Bosch Water Source Heat Pumps with an ECM Motor, this feature also enables the thermostat to achieve the humidity set point by passive dehumidification. When connected to an external dehumidifier accessory, the new Cool to Dehumidify feature enables the thermostat to reach the humidity set point during cooling operation. The thermostat can operate as a humidistat in either configuration to achieve the desired humidity level.
(see website: www.bosch-climate.us/bcc50 for details)
Supports Active and Passive Dehumidification without the need for external relays, such as Bosch Water Source Heat Pump products equipped with a Hot Gas Reheat Coil and/or ECM motor
| Models and Part Numbers | ||||
| Description | Part Number | Heat | Cool | Humidify / Dehumidify* |
| Bosch Connected Control BCC50 Wi-Fi Thermostat | 8-733-952-994 | 3 | 2 | Yes |
| Physical Data | |
| Description | Value |
| Electrical Rating: | 24 VAC (18-30 VAC), 1 amp maximum per output terminal, 6 amp maximum total load |
| DC Power: | 5 VDC (USB) |
| AC Power: | 18 – 30 VAC |
| Temperature Control Range: | 45°F to 99°F (7°C to 37°C) Accuracy: ±1°F (±0.5°C) |
| Anti-short Cycle | 1 min – 5 min (3 min default) |
| Backlight Operations: | Brightness: Low, Medium, High(default) Screen Timeout: 20 sec, 60 sec (default), 180 sec Enable Idle Mode to leave the screen on at all times |
| Humidity Control Display Range: | 0% – 100% RH +/- 5% |
| Humidity Control Setpoint Range: | 30% – 90% RH |
Humidifier and dehumidifier accessories are not provided by Bosch.
Other Manual: Bosch BCC-100 Thermostat Quick Start Guide
Bosch BCC100 Smart Phone Product Sepcification Manual
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…