WarmlyYours Hardwired Programmable Timer
Programming Guide
Pro Mode provides up to 50 ON/OFF events for any day or combination of days, M-Su, M-F, or Sa-Su at desired fixed times or self adjusting Sunup and Sundown times. In this mode self adjusting Daylight Savings Time and random modes are also available.
Do you have a California-exclusive model VPT24?
If you’re unsure, press 3 times until RND displays, then press .’6 Hr’ will display on California-exclusive models.
To exit programming at any time press override button –
To program your device:
- Perform a System Reset by gently lifting the VPT24 door from the bottom of the push pad until an audible click is heard. The door will stay open while you are programming the device:
- Press and hold followed by (Override) until stops flashing and flashes (approximately 10 seconds). Press to confirm device Reset.
- Product will go through a brief self test.
Setting up the Time and the Date
- will be flashing. Press to select the hour and press to confirm your choice.
- will be flashing. Press to select the minutes and press to confirm your choice.
- A or P will be flashing. Press to select A for AM or P for PM and press to confirm your choice.
NOTE: Daylight Savings Time shall start at 2am on the second Sunday of March (add one hour) and end at 2am on the first Sunday of November (subtract one hour). - will be flashing. Use and press and press to confirm your choice.
- will be flashing. Use to choose the month and press to confirm your choice.
- will be flashing. Use to choose the date and press to confirm your choice. The day of week will automatically adjust.
Programming your Timer Options
- Setting Sunup, Sundown, desired Offset Time and Time Zone: Sunup and Sundown are automatically adjusted using the latitude and longitude coordinates of your location. To obtain these coordinates go to www.leviton.com/VPT24 and click on Longitude/Latitude Coordinates Lookup… Type in your home address and press enter. Your latitude (N) and longitude (W) coordinates will be shown on the screen. Write down only the 2 or 3 digit number. Disregard a negative symbol (–) if it precedes the number. The time zones are limited to the North American Continent. The options you are presented are determined via your longitude in the chart below:
| TIME ZONE CALCULATIONS |
| Longitude | Time Zone |
| 60° – 80° | Eastern |
| 81° – 95° | Eastern, Central |
| 96° – 110° | Central, Mountain |
| 111° – 135° | Mountain, Pacific, Alaskan |
| 136°-143° | Pacific, Alaskan, Hawaii-Aleutian |
| 144°+ | Alaskan, Hawaii-Aleutian |
- MENUOn your timer press 4 times until SUN appears at the bottom right of the screen and press to confirm your choice.
- Use to choose your latitude (N) and press to confirm your choice.
- Use to choose your longitude (W) and press to confirm your choice.
- will be flashing to represent the offset time.
- Choose the amount of time, if any, to turn the load ON/OFF before or after Sunup and Sundown by pressing to add time to the Sunup/Sundown time and use to subtract time from the Sunup/Sundown time. Press to confirm your choice (up to 3 hours and 59 minutes).
- will appear. The time zone closest to the coordinates you SETentered will flash. Press if this is correct. If this is not correct use to choose your time zone and press to confirm your choice.
Setting ON/OFF Events:
- Press until MENU PRG is in the lower left corner.
- Press to enter the programming mode.
- Event 1 will be flashing. Press to choose this event or use to move to the next event and press to confirm your event number choice.
- All days of the week will be flashing. Press to choose all days of the week or use to scroll through M-F, Sa-Su, any single day or combination of days.
NOTE: To choose a combination of days press afterSET each day you want and then move on to the next day by pressing . Continue to scroll using until PRG flashes. - When done choosing the desired days PRG in the lower left corner will flash. Press to confirm the chosenSET days and continue on to choosing the event TURN ON TIME.
- At use to choose for time, for Sundown, for Sunup or to delete an existing program and press to confirm your choice.
- If is chosen, use to choose the hour and press to confirm your choice. Do the same for minutes.
- At 6:00P press to choose a SET TURN OFF TIME or use or to choose for Sundown, for Sunup or to delete an existing program and press to confirm yourSET choice.
- If is chosen, use to choose the hour and press to confirm your choice. Do the same for minutes.
- Continue to set desired events in the same manner. When this is done press to escape out of programming. If no buttons are pressed after approximately 30 seconds the device will automatically exit out of programming mode.
Visit our Website at: www.leviton.com
© 2017 Leviton Manufacturing Co., Inc. All rights reserved. All trademarks are the property of their respective owners.
Leviton Manufacturing Co., Inc. World Headquarters 201 North Service Road, Melville, NY 11747-3138
Telephone: 1-800-323-8920 FAX: 1-800-832-9538
Tech Line (8:30AM-7:00PM E.T. Monday-Friday): 1-800-824-3005
References:
Download Manual
WarmlyYours Hardwired Programmable Timer Operation Manuals
OTHER MANUAL
WarmlyYours Hardwired Programmable Timer Installation and Operation Instructions
WarmlyYours Hardwired Programmable Timer WIRING DIAGRAM
WarmlyYours Hardwired Programmable Timer Technical Information
WarmlyYours Hardwired Programmable Timer Operation Manuals