Thermogroup 9.2mG Thermostat Product Specification Guide

Thermogroup 9.2mG Thermostat

Box contents

• 1 x Thermotouch 9.2mG
• 1 x Installation guide
• 1 x 3m floor temperature sensor probe
• 1 x 2m sensor conduit
• 2 x Fixing screws

INTRODUCTION

Thermotouch 9.2mG thermostat features a sleek white glass display and simple, manual underfloor heating controls
The 5215 and 5215 are manual thermostats that benefit from temperature control features that you would expect from a programmable thermostat, such as temperature limits and calibration

• Specially designed for accurate, manual control of electric underfloor heating systems
• Benefit from simple on/off controls and easy, manual temperature adjustment
• Lock the screen to prevent tampering by holding the up and down arrows for 5 seconds
• Adjustable settings including temperature limits and temperature calibration to improve efficiency
• Built in ambient temperature sensor and external floor sensor for accurate temperature management

Floor temperature sensor should be installed in a conduit, within a clear area of the floor, and away from any other temperature influences

Technical Datasheet

Wiring diagram

• Live – 230V supply
• Neutral – 230V supply
• Neutral – Underfloor heating
• Live – Underfloor heating
• Earth
• Floor sensor (not polarity sensitive)
• Floor sensor (not polarity sensitive

Dimensions

Technical data

• Supply voltage 230V 50/60Hz
• Maximum load 16A (3600W)
• Backup storage EEPROM (approx. 1 year backup)
• Temperature range 5 ~ 80°C (0.5°C increments)
• Accuracy ±0.5°C
• Sensor rating NTC 10kΩ @ 25°C
• Consumption 2W
• Warranty 3 years
• IP rating IP30
• Width 85mm
• Height 85mm
• Depth 46mm (31mm in wall)

Thermogroup

• Thermogroup AU
• 1300 368 631
• Technical Line: 1300 989 464
• www.thermogroup.com.au

REFERENCE:

DOWNLOAD MANUALS:

Thermogroup 9.2mG Thermostat Product Specication Guide

OTHER MANUALS:

Thermogroup 9.2mG Programmable Thermostat User Guide

Thermogroup 9.2mG Thermostat Product Specification Guide