Thermogroup 9.2mG Thermostat
Box contents
- 1 x Thermotouch 9.2mG
- 1 x Installation guide
- 1 x 3m floor temperature sensor probe
- 1 x 2m sensor conduit
- 2 x Fixing screws
INTRODUCTION
Thermotouch 9.2mG thermostat features a sleek white glass display and simple, manual underfloor heating controls
The 5215 and 5215 are manual thermostats that benefit from temperature control features that you would expect from a programmable thermostat, such as temperature limits and calibration
Specially designed for accurate, manual control of electric underfloor heating systems
Benefit from simple on/off controls and easy, manual temperature adjustment
Lock the screen to prevent tampering by holding the up and down arrows for 5 seconds
Adjustable settings including temperature limits and temperature calibration to improve efficiency
Built in ambient temperature sensor and external floor sensor for accurate temperature management
Floor temperature sensor should be installed in a conduit, within a clear area of the floor, and away from any other temperature influences
Technical Datasheet
Wiring diagram
- Live – 230V supply
- Neutral – 230V supply
- Neutral – Underfloor heating
- Live – Underfloor heating
- Earth
- Floor sensor (not polarity sensitive)
- Floor sensor (not polarity sensitive
Dimensions
Technical data
- Supply voltage 230V 50/60Hz
- Maximum load 16A (3600W)
- Backup storage EEPROM (approx. 1 year backup)
- Temperature range 5 ~ 80°C (0.5°C increments)
- Accuracy ±0.5°C
- Sensor rating NTC 10kΩ @ 25°C
- Consumption 2W
- Warranty 3 years
- IP rating IP30
- Width 85mm
- Height 85mm
- Depth 46mm (31mm in wall)
Thermogroup
- Thermogroup AU
- 1300 368 631
- Technical Line: 1300 989 464
- www.thermogroup.com.au
REFERENCE:
DOWNLOAD MANUALS:
Thermogroup 9.2mG Thermostat Product Specication Guide
OTHER MANUALS:
Thermogroup 9.2mG Programmable Thermostat User Guide