Tekmar

tekmar Q 552 Programmable Thermostat Quick Start Guide

tekmar Q 552 Programmable Thermostat

  1. Location
  2. Remove Mounting Base
  3. Install Mounting Base
  4. Switch Settings

Switch Position Action
ON LOCK Access level adjustment is not available.
OFF UNLOCK Access level adjustment is available.

Wiring

Install Thermostat

User Interface

Critical Settings

For a full list of settings and operational details, please refer to the thermostat Installation and Operation Manual (D552) included with compatible tekmarNet® controls or download the brochure from www.tekmarcontrols.com
The following settings are essential to the successful operation of the system.
Step 1: Set switch setting #1 and tekmarNet® system control located in the mechanical room to Unlock to change Access level to Installer. Return to Lock setting once installation has been completed.
Step 2: Press and hold “Home” button for 3 seconds to enter programming menus.
Step 3: Touch NEXT to locate the Setup Menu and touch ENTER.

Setup Menu Settings
SENSOR 1

Select to the type of sensor connected to auxiliary sensor input 1.

Range: OFF, ROOM, FLOR (floor), OUT (outdoor)
Default: OFF
SENSOR 2

Select to the type of sensor connected to auxiliary sensor input 2.

Range: OFF, ROOM, FLOR (floor)
Default: OFF
ROOM SENSOR

Select whether the built-in room temperature sensor is on or off.

Range: OFF or ON
Default: ON
W1 TERMINAL UNIT

Select the terminal unit type of the first stage of heat W1.

Range: CTRL, HRF1, HRF2, CONV, COIL, OTHR
Default: CTRL
Setup Menu Settings
W1 PUMP

Select whether the boiler system pump or mix system pump on a tekmarNet® system control should operate while the first stage of heat W1 is operating.

Range: OFF or ON
Default: ON
W1 THERMAL MOTOR

Select whether the first stage of heat W1 operates a thermally actuated zone valve (wax actuator). When set to ON, there is a 3 minute delay before operating the pump and any heat sources.

Range: OFF or ON
Default: OFF
W CYCLES PER HOUR

Select the number of heating cycles per hour. Only available when the thermostat is not connected to a tekmarNet® System Control.

Range: SYNC, AUTO, 2 to 12
Default: SYNC

tekmar Control Systems Ltd., Canada, tekmar Control Systems, Inc., U.S.A. Head Offi ce: 5100 Silver Star Road, Vernon, B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarcontrols.comProduct design, software and literature are Copyright © 2011 by: tekmar Control Systems Ltd. and tekmar Control Systems, Inc.All specifications are subject to change without notice. Printed in Canada. Q 552 – 11/11.

Reference

Download Manual:

tekmar Q 552 Programmable Thermostat Quick Start Guide

tekmar Q 552 Programmable Thermostat Quick Start Guide

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago