Tekmar 557 Thermostat Quick Setup Guide

Tekmar 557 Thermostat

Location

Install Thermostat

Switch Settings

Switch	Position	Action
1	ON	LOCK Access level adjustment is not available.
	OFF	UNLOCK Access level adjustment is available.
2	Not Used

Stand Alone Wiring

For tekmarNet®2 or 4 wiring, see Application Brochure 557_A or Installation & Operation Manual 557_D.

User Interface

Critical Settings

The following settings are essential to the successful operation of the system.

• Step 1: Set switch setting #1 and tekmarNet® system control located in the mechanical room to Unlock to change Access level to Installer. Return to Lock setting once installation has been completed.
• Step 2: Press and hold “Home” button for 3 seconds to enter programming menus.
• Step 3: Touch NEXT to locate the Setup Menu and touch ENTER.

Setup Menu Settings

SENSOR 1 Select the type of sensor connected to auxiliary sensor input 1.

Range: OFF, ROOM, FLOR (floor), DUCT

Default: OFF

SENSOR 2 Select the type of sensor connected to auxiliary sensor input 2.

Range: OFF, ROOM, FLOR (floor), OUT (outdoor)

Default: OFF

SENSOR 3 Select the type of sensor connected to auxiliary sensor input 3.

Range: OFF, ROOM, FLOR (floor), HUM (humidity)

Default: OFF

ROOM SENSOR Select if the built-in room temperature sensor is on or off.

Range: OFF or ON

Default: ON

W1 TERMINAL UNIT Select the terminal unit type of the first stage of heat W1.

Range: NONE, HRF1, HRF2, OTHR (other)

Default: NONE

Setup Menu Settings

BACKUP W2 TERMINAL UNIT Select the type of backup heating.

Range: NONE, CONV, COIL, FURN (furnace), OTHR (other)

Default: NONE

Y1 RELAY Select the cooling equipment the Y1 relay operates.

Range: HP1 (heat pump), AC1 (air conditioner), W2

Default: HP1

Y2 RELAY Select the equipment the Y2 relay operates.

Range: OFF, HP2 (heat pump stage 2), AC2 (air condi- tioner stage 2), HRV, DHUM (dehumidifier), VALV (valve)

Default: OFF

ACCESSORY RELAY Select the equipment the accessory relay operates.

Range: OFF, HUM (humidifier), DHUM (dehumidifier), VALV (valve)

Default: OFF

O/B VALVE Select the heat pump operation of the O / B relay.

Range: O or B

Default: O

For a full list of settings and operational details, please refer to the thermostat Installation and Operation Manual (557_D) included with compatible tekmarNet® controls or download the brochure from www.tekmarControls.com
tekmar Control Systems Ltd., A Watts Water Technologies Company. Head Offi ce: 5100 Silver Star Road, Vernon, B.C. Canada V1B 3K4, 250-545-7749,
Fax. 250-545-0650
Web Site: www.tekmarControls.com

Product design, software and literature are Copyright ©2012 by tekmar Control Systems Ltd., A Watts Water Technologies Company

Reference:

Download Manual: Tekmar 557 Thermostat Quick Setup Guide

another manual:Tekmar 557 Thermostat Installation & Operation Manual

Tekmar 557 Thermostat Quick Setup Guide