Tekmar

Tekmar 519 Radiant Thermostat User Manual

Tekmar 519 Radiant Thermostat

This brochure will provide you with the information you need to benefit the most from your tekmar Thermostat. Please visit www.tekmarControls.com for more detailed information on this or any other tekmar product.

User Interface

Display Symbols

This thermostat will display symbols on its screen in order to indicate what mode it is in, what temperature it is operating at, or what equipment it is trying to turn on. This section describes each of those symbols.

HEAT ONHeat is turned on. MIN

The floor is at or below the floor minimum temperature.

MODE OFFThe heating system is off.
MAXThe floor has reached the floor maximum temperature.
WARNING SYMBOLIndicates an error is present.

Setting The Temperature

To change the heat temperature setting, push the or buttons to select a preferred temperature setting.

  • Air Temperature Only ———————————————–
    If there is only an air temperature sensor (no floor sensor), the thermostat operates to control your desired air temperature.
  • Floor Temperature Only ——————————————–
    If the air sensor has been disabled, the thermostat will only maintain floor temperature and ignore air temperature. This operation is recommended for areas such as bathrooms to ensure that tile floors are warm to the touch.
  • Floor and Air Temperature —————————————–
    If the air sensor is turned on and a floor sensor is connected, the thermostat will maintain your desired air temperature as well as a minimum floor temperature. This operation is recommended for areas with large windows that allow the sun to shine into a room and keep it warm without the need for heat. This can allow the floors to cool off during the afternoon. When the sun goes down, it can take a long time for the floors to get warm again. This may cause the room to cool off too much in the early evening. A floor minimum setting can help with this condition by maintaining a floor minimum temperature. Keep in mind the floor minimum temperature will override the air temperature, and if set too high, may overheat the room. This operation is also recommended for rooms with hardwood floors. Setting floor minimum and maximum temperatures is a way of enhancing the comfort of your living space while protecting your floor coverings.

  • Suggested maximum for all floor types other than wood.
  • Bathrooms and kitchens. Suggested maximum for wood floors.
  • Rooms with large windows prevent under heating in the evening.
  • Freeze protection for garages.

Settings

  • Press and hold down both the buttons for 3 seconds to change from one step to the next.
  • Release both buttons once the step has been reached.
  • Press thethe button to change the setting, if available.
  • Press and hold down both thebuttons for 3 seconds to go to the next step, OR
  • After 15 seconds of no-button activity, the display goes back to normal operation.
Display Setting
User settings.
MODE Select heat or off.
UNITS Select the temperature units in degrees Fahrenheit or Celsius.
BACKLIGHT
Select when the display backlight should operate. Options are Off Auto, and On. Auto operates the backlight for 30 seconds after a keystroke.
SET FLOORSet the floor minimum temperature. Available when an auxiliary floor sensor is connected and the built-in room temperature sensor is on.
TYPEDevice Type number. Hold the button to view the software version.
ESCAPERelease the buttons to return to the home screen.

More Information

This User Brochure contains standard information on how to make adjustments to an installed product. More detailed information can be found in this product’s Installation and Operation Manual (518_D) at www.tekmarControls.com

Product design, software and literature are Copyright ©2013 by tekmar Control Systems Ltd.,
A Watts Water Technologies Company. Head Office: 5100 Silver Star Road, Vernon, B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarControls.com

REFERENCE:

Tekmar 519 Radiant Thermostat User Manual

Other  Manual: Tekmar 519 Radiant Thermostat Quick Set-up Guide

Tekmar 519 Radiant Thermostat Installation and Operation Manual

Tekmar 519 Radiant Thermostat Specification Sheet

Tekmar 519 Radiant Thermostat User Manual

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago