Suntouch 500850 Command Programmable Touchscreen Thermostat Specification Guide

Suntouch 500850 Command Programmable Touchscreen Thermostat Specification

Programmable Touchscreen Thermostat
This all-in-one thermostat includes a built-in relay to control 120 or 240 VAC floor heating systems and a GFCI to improve safety. By default, the SunStat Command controls the floor temperature. It can optionally limit the floor temperature to prevent the space from overheating or be configured to control the space through air temperature alone.

Specifications

Literature	IOM-ST-Command, ES-ST-Command
Operation Voltage	120/240 VAC, 60 Hz, 3 watts
Maximum Load	15 amps resistive
Maximum Power	1800 watts at 120 VAC 3600 watts at 240 VAC
GFCI	Class A (5 milliamp trip)
Dimensions	4-5/8″ H x 2-19/20″ W x 1-13/20″ D (118 x 75 x 42 mm)
Enclosure	White PVC plastic, NEMA type 1
Ambient conditions	32 to 86°F (0 to 30°C), <90% RH non-condensing
Floor Sensor	Thermistor, 10k NTC type, 300 V jacketed cable, 15′ long

Features

• Floor and air sensing control
• Touchscreen display with multiple color themes
• Thin profile with removable, paintable beauty ring
• 7-day programmable schedules
• Energy use monitoring
• Comprehensive help screens
• Home automation system tie-in
• Temporary hold setting

ATTENTION
This Engineering Sheet is not intended to provide full installation instructions and safety information. In order to avoid property damage or injury, please refer to the complete installation manual and product safety information provided with the product.

SunStat Command Application Examples

Typical Wiring for SunStat Command with one mat or cable (120/240 VAC).
Dedicated 120 or 240 VAC, 20-amp (maximum) circuit (maximum 15 amp load through SunStat control)

Typical Wiring for SunStat Command with multiple mats or cables (120/240 VAC).
Dedicated 120 or 240 VAC, 20-amp (maximum) circuit (maximum 15 amp load through SunStat control)

Electrical Wiring Diagram for SunStat Command with SunStat Relay C3 (120/240 VAC). Up to 10 SunStat Relay C3’s can be connected to expand the area controlled by a single SunStat Command.
Dedicated 120 or 240 VAC, 20-amp (maximum) circuit (maximum 15 amp load through SunStat control)

USA: T: (888) 432-8932 • F: (417) 831-4067 • SunTouch.com Canada: T: (905) 332-4090 • F: (905) 332-7068
Latin America: T: (52) 81-1001-8600 • SunTouch.com
© 2019 SunTouch

REFERENCE:

Download Manual

Suntouch 500850 Command Programmable Touchscreen Thermostat Specification Guide

Suntouch 500850 Command Programmable Touchscreen Thermostat Specification Guide