Choosing the location of your devices wisely will optimize Allia’s mesh network and promote efficient communication between the devices. Leave at least 30 cm (12 in.) clearance around the thermostat to ensure adequate ventilation.
For more information, visit www.stelpro.com/allia
All wiring diagrams:
stelpro.com/allia/sat402zb-quickstart-guide
WARNING
REMOVE THE OLD THERMOSTAT AND ATTACH THE MOUNTING PLATE TO THE ELECTRICAL BOX.
NOTE: Loosen the screw under the thermostat slightly to remove the mounting plate from the thermostat.
CONFIGURE THE INITIAL SETTINGS
Press for 3 seconds to access the advanced menus. Press to confirm.
PAIR THE THERMOSTAT TO THE ALLIA ECOSYSTEM.
Visit our website to get more information, learn everything there is to know about Allia or view the complete user guide.
www.stelpro.com/allia
STELPRO SAHUB001 Allia Smart Thermostat User Guide
Download PDF
STELPRO SAHUB001 Allia Smart Thermostat User Guide
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…