STELPRO SAHUB001 Allia Smart Thermostat
BEFORE GETTING STARTED
Choosing the location of your devices wisely will optimize Allia’s mesh network and promote efficient communication between the devices. Leave at least 30 cm (12 in.) clearance around the thermostat to ensure adequate ventilation.
For more information, visit www.stelpro.com/allia
All wiring diagrams:
stelpro.com/allia/sat402zb-quickstart-guide
WARNING
- To reduce the risk of fire, electric shock or electrocution, CUT OFF THE POWER AT THE ELECTRICAL PANEL and make sure the circuit is switched off.
- Always follow the electrical code in effect in your region. The thermostat must be installed by a CERTIFIED ELECTRICIAN.
- Connect the thermostat ONLY to a 120 VAC to 240 VAC power source and observe the load limits.
REMOVE THE OLD THERMOSTAT AND ATTACH THE MOUNTING PLATE TO THE ELECTRICAL BOX.
NOTE: Loosen the screw under the thermostat slightly to remove the mounting plate from the thermostat.
CONNECT THE ELECTRICAL WIRES
- UNIVERSAL CONNECTION
- ALTERNATIVE CONNECTION
- CONNECTION
ATTACH THE THERMOSTAT TO THE MOUNTING PLATE
CONFIGURE THE INITIAL SETTINGS
Press for 3 seconds to access the advanced menus. Press to confirm.
- MENU 20
TEMPERATURE FORMAT (°C / °F) - MENU 30
HEATING MODE
Baseboard (OFF) / Fan Heater (ON) - MENU 31
LOBBY MODE*
Standard Room (STD) / Lobby (LbY) * Lobby mode is an option only in Fan Heater mode.
INSTALL AND CONFIGURE THE ALLIA APP
PAIR THE THERMOSTAT TO THE ALLIA ECOSYSTEM.
- In the Allia application, click on the + in the device tab.
- Select thermostat as device type.
- On the thermostat, access menu 10 by pressing the central button for 3 seconds and selecting the automatic connection option (ON). Press the central button to confirm the selection.
Visit our website to get more information, learn everything there is to know about Allia or view the complete user guide.
www.stelpro.com/allia
STELPRO SAHUB001 Allia Smart Thermostat User Guide
Reference
Download PDF
STELPRO SAHUB001 Allia Smart Thermostat User Guide
Leave a Reply