SALUS BTRP230 Pure White Room UP Electronic Digital Thermostat User Guide

SALUS BTRP230 Pure White Room UP Electronic Digital Thermostat

INTRODUCTION

The BTRP230 thermostat from Salus Controls is a stylish and accurate programmable flush-mount digital room thermostat for Bezel 55. You can now simply adjust your home temperature as desired in order to create a comfortable home environment.

PRODUCT COMPLIANCE

This product complies with the essential requirements of the following EC Directives: 2014/30/EU, 2014/35/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.saluslegal.com.

SAFETY INFORMATION

Use in accordance with the regulations. Indoor use only. Keep your equipment completely dry. Disconnect your equipment before cleaning it with a dry towel. The unit is to be used for the control of room temperature inside the house.

INSTALLATION

This accessory must be fitted by a competent person, and installation must comply with the guidance, standards, and regulations applicable to the city, country or state where the product is installed. Failure to comply with the relevant standards could lead to prosecution.

• Quick guide
• 2x fixing screws

Terminals

Wiring

You can wire the thermostat directly to the KL08NSB wiring centre or to an actuator (purchased separately).

Mounting

LCD Icons

1. BOX indicates which mode is active
2. Standard temperature
3. Reduced temperature
4. Automatic
5. Party mode
6. Holiday mode
7. Frost protection
8. Temporary override indicator
9. Temperature indicator
10. Programs number indicator
11. Day of the week
12. Floor sensor connected
13. Cool mode
14. Heat mode
15. Time indicator

Button Functions

Setting time and date

Setting Programs

You can customize your programs by long pressing  when on the main screen.

Override / Manual Control

When in automatic mode you can override the temperature by pressing the up or down arrow buttons until the next switching of the program.
Manual control: you can set your thermostat into manual control by moving the box icon to the sun symbol or the moon symbol only, here you can change your temperature by pressing the left or right arrow buttons. Press the tick button to confirm.

Reset

 

REFERENCE

Download Manual:

SALUS BTRP230 Pure White Room Thermostat UP Electronic Digital User Guide

SALUS BTRP230 Pure White Room Thermostat UP Electronic Digital User Guide

other manuals:

SALUS BTRP230 Pure White Room Thermostat UP Electronic Digital Installation Manual

SALUS BTRP230 Pure White Room UP Electronic Digital Thermostat User Guide