Statement of use: The 8029B can be used with most 24-volt gas, oil, or electric heating and air conditioning systems, single-stage heat pumps, or gas millivolt heating systems. It cannot be used with 120-volt heating systems or multistage heat pumps.
Set the HEAT/COOL mode switch to HEAT or COOL. The unit will display the ambient temperature. Set the Fan switch to automatic.
Turn the Control Knob to increase or decrease the TARGET TEMP. The TARGET TEMP will be displayed when you are adjusting the temp. (The display will return to show the current ROOM TEMP in a few seconds).
Your thermostat is now in operation.
In the winter, set the HEAT-COOL Mode switch to HEAT to control your heating system.
In the summer, set the HEAT-COOL Mode switch COOL to control your air conditioner.
In spring and fall or when windows are open, you can set the HEAT/COOL Mode switch to OFF.
Setting the FAN Mode switch to AUTO automatically runs your system’s fan during heating and cooling.
Setting the FAN Mode switch to ON runs your system’s fan continuously even without heating or cooling.
F0 / C0 Select
Centigrade / Fahrenheit selection. The C/F jumper is on the back of the thermostat control unit it determines which temperature system is displayed on the LCD display.
When the batteries are low, the battery icon will come on and flash.
The two AA Batteries in the unit need to be replaced. In some installations, your heater system will stop functioning when the thermostat loses power. Replace batteries as soon as you see this warning. The thermostat setting will remain for 30 seconds while the batteries are removed and replaced.
DOWNLOAD MANUALS:
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…