Please read this manual completely and carefully before starting to use the device. The manual contains important information about the intended use of the device. Especially observe the safety notes. Keep the manual for later consultation. If you hand over the device to other persons for use, please hand over the operating manual as well.

Product Description

The device moves a valve to intelligently control the ﬂow of heat to the radiator. With the Thermostat Radiator Valve TV01 you can conveniently adjust the room temperature between 5-30°C, and save more than 15% of energy.
The device is part of the Tuya smart home system and works with the ZigBee 3.0 protocol. All devices on the system can be conﬁgured comfortably and individually with the Tuya smartphone app.
The temperature can be controlled individually, room by room.
The radiator thermostat ﬁts to all common radiator valves and is easy to mount-without having to drain any water or intervene in the heating system. The additional boost function enables the radiator to be heated up quickly for a brief period of time by opening the valve for 5 minutes. There will be a pleasant room temperature right away because of the radiated heat.

Device Overview

Start-up

Before we get started

2×AA batteries are required for TV01 to work, please get prepared.
A smart gateway hub is required for the TV01 to work.
Temperature is shown in degrees Celsius.

Inserting(replacing) batteries.

Pull oﬀ the battery compartment cover on the underside of the device.
Insert 2 new LR6(mignon/AA) batteries in the battery compartment making sure they are the right way round.
Reattach the battery compartment cover and latch it into place.

The service life of new alkaline batteries is approximately 1.5 years. A battery symbol( ) on the display indicates that the batteries need to be replaced. After removing the empty batteries, wait approx.1 minute before inserting the new ones. This device does not support operation with rechargeable batteries.

Set date and time
If batteries are inserted or replaced, the date and time is automatically requested after a brief display of the ﬁmware version number.

Set the year, month, dayhour and minute with the +/- button, and conﬁm with the Menu button.
You can press the Boost button to return to the previous menu during the setting of date and time.
The display of ‘InS’ with the rotating ‘ ’ shows that the motor is still traveling back.
When ‘AdA’ is shown in the display, the radiator thermostat can be installed on the valve. After installation, press the Boost button to run adaptive.
The display of ‘AdA’ with the rotating ‘ ’ shows that an adapting run to adapt the thermostat to the valve.
If the adapting runs is initiated before installation, press Boost button and the motor travels back to the ‘InS’position. If an error message (F1,F2,F3) is displayed, press the Pair /Boost button and the motor similarly travels back to the ‘InS’ position.

Installation of the radiator thermostat

The radiator thermostat is easy to install and can be done without draining heating water or intervening in the heating system. No special tools are required, nor does the heating have to be switched oﬀ. The ring nut attached to the radiator thermostat can be used universally and without accessories for all valves with a thread size of M30×1.5 from the most popular manufacturers such as.

Danfoss
Heimeier
MNG
Junkers
Landis&Gyr(Duodyr)
Honeywell-Braukmann
Oventrop
Schlösser
Comap
Valf Sanayi
Mertik Maxitrol
Watts
Wingenroth(Wiroﬂex)
R.B.M
Tiemme
Jaga
Siemens
ldmar54

By means of the adapters in the delivery, the device can be installed on radiator valves of type Danfoss RA, Danfoss RAV and Danfoss RAVL.

Unscrew your existing radiator thermostat
No worries, water will not leak during this process.

M30×1.5

Screw the TV01 smart radiator thermostat directly onto the radiator if the connector type is M30x 1.5(picture shown as below). You can adjust the angle to make the screen facing the viewer properly.
Rotate the thermostat dial to the maximum value, themaxvaluemaybe 6or8.
Check the is active.
Install the device.

Danfoss RAVL Valve

Check the is active.
The valve bodied have elongated notches around their circumference, which ensure that the adapter is properly seated when it snaps on: snap on the adapter completely, so that the pins inside the adapter are lined up with the notches on the valve.
Install the adapter, Plane A is aligned with Plane B.
Install the round tube into the device.
Install the device.

Danfoss RAV Valve

Rotate the thermostat dial to the maximum value, the max value may be 6 or 8.
Check the is active.
The valve bodied have elongated notches around their circumference, which ensure that the adapter is properly seated when it snaps on: snap on the adapter completely,so that the pins inside the adapter are lined up with the notches on the valve.
Install the adapter, Plane A is aligned with Plane B.
Union nut,
Install the device.

Danfoss RA Valve

Rotate the thermostat dial to the maximum value, “N” Align Dial.
Check that is active.
The valve bodied has elongated notches around its circumference, which ensures that the adapter is properly seated when it snaps on: snap on the adapter completely, so that the pins inside the adapter are lined up with the notches on the valve.
Install the adapter, Plane A is aligned with Plane B.
Union nut.
Install the round tube into the device.
Install the device.

M28x1.5mm

Select the length of the ejector rod according to the following brands or valve sizes, and the size of ejector rod is 15 / 17 / 19 / 24mm.
To install the ejector rod with the correct size into the hole.
To install the adapter onto M28 * 1.5 valve.

Giacomini

To install the adapter onto the Giacomini valve in the correct direction;
To install the GIA ejector rod into the hole.

Caleﬃ

Open the valve ﬂow to the maximum, as shown in pic 1;
To install the adapter onto the Caleﬃ valve in the correct direction.

Use the Ejector rod
Due to the dimensional and assembly tolerance of the metal valve, it may result in the following situations:

When the device is failure, F2 is displayed.
The metal valve cannot be fully closed and is kept heating all the time.
Handling method: Please use the ejector rod 1.6 mm (1) ﬁrst, if the above two situations still exist, try to use the ejector rod 2.6mm (2) instead.

Interface screen
When you see the LCD screen is showing information as below, the radiator thermostat is ready for conﬁguration. If not, please uninstall and re install the batteries and redo step 4.

Software Installation

MOES App is upgraded as much more compatibility than Tuya Smart/Smart Life App, functional well for scene controlled by Siri, widget and scene recommendations as the fully new customized service.
(Note: Tuya Smart/Smart Life App still works, but MOES App is highly recommended)

Open MOES App , use your phone number or email address to register and login. Tap + on the top right, choose Gateway Control-> Wireless Gateway (ZigBee) and simply follow the inbuilt setup wizard for device installation and conﬁguration.
After the ZigBee smart gateway hub is added successfully, you can add the sub-device on the gateway hub interface.
Long press Pair button on the radiator thermostat for 5 seconds until the ZigBee signal icon ﬂashed, which means the device has entered the pairing mode.
The blue LED indicator of gateway hub ﬂashes during pairing mode.
When the radiator thermostat is successully added, the blue LED indicator will extinguish within 1 second, the device ZigBee signal is always on.

Product features

Auto Mode
In automatic mode, the temperature is controlled in accordance with the set heating proﬁle. Manual changes are actived until the next point at which the proﬁle changes. Afterwards, the deﬁned heating proﬁle will be activated again. To activate the automatic mode, please proceed as follows:

Press the mode button to select icon.
Default temperature: 17°C and 21°C.
Temperature range: 5-30 °C, step: 0.5 °C.
App operation: Click the auto mode icon in the App control panel.

Manual Mode
In manual mode, the temperature is controlled in accordance with the current temperature set via ‘+/-’ button. The temperature remains activated until the next manual change. To activate the manual mode, please proceed as follows:

Press the mode button to select the icon.
Default temperature: 20°C.
Temperature range: 5-30°C, step: 0.5 °C. App operation: Click the manual mode icon in the App control panel.

Holiday Mode
When you go out or go to a party, you will use the holiday mode. The holiday mode will automatically start at the set time starting point and run the holiday temperature. When the holiday mode is not activated, and you want to view the holiday mode settings, please press the Mode button to view, the holiday mode icon will ﬂash for 5 seconds and then it will automatically return to the auto mode.lf you want to end your holiday mode earlier, press the Mode button to cancel.

App operation: Click the Mode icon to switch to the holiday mode in the App control panel, and switch to any other mode to cancel the holiday mode.

Open Window Detection

The device automatically stop heating when it detects a sudden temperature drop(5°C in 5 minutes as default).
This is usually caused by an opened window or door and the open window icon will display( ) on the screen.
The device will resume to its previous status after detection if no actions is implemented. Or you canmanually resume the device by pressing the mode button.
App operation: Click the open window icon in App control panel to cancel the window opening function. *The open window detection only operates in automatic mode and manual mode.

Oﬀset Temperature
As the temperature is measured on the radiator thermostat, the temperature distribution can vary throughout a room.To adjust this, a temperature oﬀset of +5°C can be set. If a nominal temperature of e.g. 20 °C is set but the room presents with only 18°C an oﬀset of -2.0°C needs to be set. An oﬀset temperature of 0.0°C is set in the settings. To adjust the oﬀset temperature, please proceed as follows.

Long press the menu button for 5 seconds, it will enter the setting interface.
Select “Oﬀset” option via ‘+/-’ button, and press menu button to enter the oﬀset temperature interface.
Set the desired oﬀset temperature using ‘+/-’ button and conﬁrm with the menu button. App operation: Click the oﬀset icon in the App swttings screen.

Eco and Comfortable Temperature
The comfort and Eco temperature button makes switching between comfort and Eco temperature simple and user friendly. These have been set at the factory at 21.0°C (comfort temperature) and 17.0°C (Eco temperature). They can be adjusted as follows:

Press menu button to select comfortable temperature( ) or Eco temperature( ).

App operation: Click the Comfortable/Eco temperature icon in the App control panel to select the corresponding temperature mode.
Even in auto mode, the temperature can be changed at any time using the button. It will then remain the same until the next point at which the program changes.

Child Lock
Operation of the device can be locked to avoid settings being changed unintended(e.g. through involuntary touch).

To activate/deactivate the child lock, please proceed as follows:

Long press the mode button for 5 seconds, it will show LOC symbol on the screen and the device button cannot be used.
Long press the mode button for 5 seconds to unlock child lock.

App operation: Click the child lock icon in the App settings screen.

Anti-Freezing Mode

The device operation

In the manual mode, when the temperature is manually adjusted to less than 5 degrees, the screen will display “AF”, and the anti-freezing function will be started to ensure that the indoor temperature is “8” degrees.
Press any button to cancel anti-freezing function and return to automatic mode.

App operation

Click the anti-freezing icon( ) to turn on/oﬀ the function in the App settings screen.

Note: Once this function is activated, other functions are not available unless the function is deactivated.

Heating stop (Power Saving) Mode Battery life can be prolonged by switching the heating oﬀ.
To achieve this, the valve is closed fully. To activate the heating stop, please proceed as follows:
The device operation

• In manual mode, manually adjust the temperature to more than 30 degrees, display “HS” on the screen, start the heating stop function, and the device will no longer be able to adjust the temperature.
• Press any button to cancel the heating stop function and return to automatic mode.

App operation
Click the Heating stop icon ( ) to turn on/oﬀ the function in the App settings screen.

Note: Once the function is activated, other functions are not available unless the function is deactivated.

Anti-Calciﬁcation (Descaling) Protection
The equipment will automatically run for a period of time every week to prevent calciﬁcation of the valve.

Boost
Sometimes people go home earlier than usual, and the rapid heating function will make you feel the warmth of the room faster. When activated, the valve will be fully opened for 5 minutes. The heating of a room takes longer than 5 minutes, but the heat given oﬀ by the radiator can be felt immediately.

Press the boost button to activate the boost function.
The remaining time for the function will be counted down in seconds(‘299’to‘000’).
After these 5 minutes have elapsed, the actuator changes to the mode which was previously active (auto/manual) with the previously set temperature.
The function can be deactivated at any time by pressing the boost button again.

App operation: Click the Boost icon( ) in the App control panel to cancel the boost function.

Press the menu button for 5 seconds, enter Setting/Date Week programming stage/Open window/Comfortable temp/ECO temp/Oﬀset/Holiday setting.

App operation: Click the settings icon ( ) in the App control panel.

Setting

Date
To set the date and time, please proceed as follows:

Long press the menu button for 5 seconds, it will enter the setting interface.
Select “Date/Time” option via ‘+/-’ button, and press menu button to enter the Date/Time setting interface.
Select the desired year/month/day/hour/minute using the “+/-” button and conﬁrm with the menu button. To conﬁrm, the time ﬂashes three times.
Use the boost button to return.

Note: When the device is successfully paired with the phone, the divice time is synchronized with the phone time.

Week Programming Stage
In this menu item, you can create a heating proﬁle with heating and cooling phases according to your personal needs. You can set up to ten stages of temperature every day. The factory default is ﬁve stages.

Press the menu button for 5 seconds to open the conﬁguration menu.
Select “Prg” using the “+/-” button and conﬁrm with the menu button.
In the menu item “dAy” , use the “+/-” button to select single days of the week, all weekdays, the weekend or the entire week for your heating proﬁle and conﬁrm with the menu button.
Conﬁrm the start time 00:00 pm with the menu button.
Select the desired temperature and start time using the “+/-” button and conﬁrm with the menu button.
The next time is shown in the display. You can adjust the time via the “+/-” button.
Select the desired temperature for the next time period using the “+/-” button and conﬁrm with the menu button.
Temperature range: 5-30°C, step: 0.5 °C.
Repeat this procedure until temperatures are stored for the entire period between 0:00 and 24:00 h. To conﬁrm, the time ﬂashes three times.
Use the boost button to return.

App operation: Click the week programming stage icon( )in the App control panel.

Open Window

Press the menu button for 5 seconds to open the conﬁguration menu.
Select open window( ) via the “+/-” button in the menu.
Conﬁrm with the menu button.
Select the desired temperature using the “+/-” button and conﬁrm with the menu button. To conﬁrm, the time ﬂashes three times.
Temperature range: 5-30°C, step: 0.5°C.
Use the boost button to return.

APP operation: Click the open window icon( ) in the App settings screen.

Comfortable Temperature

Press the menu button for 5 seconds to open the conﬁguration menu.
Select comfortable temperature icon( ) via the “+/-” button in the menu.
Conﬁrm with the menu button.
Select the desired temperature using the “+/-” button and conﬁrm with the menu button. To conﬁrm, the temperature ﬂashes three times.
Temperature range: 5-30°C, step: 0.5°C.
Use the boost key to return.

APP operation: Click the comfortable temperature icon ( ) in the App settings screen.

ECO Temperature

Press the menu button for 5 seconds to open the conﬁguration menu.
(Select ECO temperature icon)( ) via the “+/-” button in the menu, conﬁrm with the menu button.
Select the desired temperature using the “+/-” button and conﬁrm with the menu button. To conﬁrm, the temperature ﬂashes three times.
Temperature range: 5-30°C, step: 0.5°C.
Use the boost button to return.

APP-Betrieb: Klicken Sie auf das ECO-Temperatursymbol ( ) im App-Einstellungsbildschirm.

Oﬀset

Press the menu button for 5 seconds to open the conﬁguration menu.
Select oﬀset icon( )via the “+/-” button in the menu.
Conﬁrm with the menu button.
Select the desired temperature using the “+/-” button and conﬁrm with the menu button. To conﬁrm, the temperature ﬂashes three times.
Temperature range: -5~5°C, step:0.1°C.
Use the boost button to return.

APP operation: Click the Oﬀset temperature icon()in the App settings screen.

Holiday Setting

Press the menu button for 5 seconds to open the conﬁguration menu.
(Select holiday mode icon)( ) via the “+/-” button in the menu.
Confrm with the menu button.
Select the start date using the “+/-” button and conﬁrm with the menu button.
Select the end date using the “+/-” button and conﬁrm with the menu button.
Select the desired temperature using the “+/-” button and conﬁrm with the menu button. To conﬁrm, the temperature ﬂashes three times.
Temperature range: 5-30°C, step: 0.5°C.
Use the boost button to return.

APP operation: Click the holiday mode icon ( ) in the App settings screen.

Note: if there is no operation in the setting interface within one minute, the setting will exit automatically.

Voice Control

Amazon Alexa
Amazon Alexa is an intelligent personal assistant developed by Amazon, and is capable of voice interaction. Smart radiator thermostat works with Alexa to allow you to regulate the temperature of each room in your system by using a wake-word and an instruction. The wake-work is “Alexa” followed by an instruction such as “increase temperature.” Currently, Amazon has made interaction and communication with Alexa only available in English.
Alexa requires explicit instructions. You must inform Alexa of the room to which you wish to address followed by an instruction, such as “increase temperature.” If no speciﬁc room is mentioned, Alexa will ask you which room you want to address, and then will increase the setpoint temperature by 1°C only based on the room reply from you. If you want the setpoint temperature to increase by 4°C in the living room, you must explicitly state to Alexa to “increase the temperature in the living room by 4°C.”

Note: If Alexa is asked to increase the temperature by 2°C, then Alexa will add 2°C to your set-point. If the ambient temperature is already > 2°C above the current set-point then the actual temperature will not change and smart radiator thermostat will not turn the heating ON.

Example: If the current set-point is 16°C, the current room temperature is 19°C and you ask Alexa to increase the temperature by 2°C – the current set-point will change to 18°C but the not start because the room temperature is already higher than 18°C.
Common commands for Alexa

Listed below are common commands used with Alexa:

Discover Devices: “Alexa, discover devices.”
Reduce Temperature: “Alexa, decrease the DEVICE NAME by 4 degrees” / “Alexa, make it cooler in here.”
Increase Temperature: “Alexa, increase the DEVICE NAME by 3 degrees” / “Alexa, make it warmer in here.”
Set Temperature: “Alexa, set the DEVICE NAME to 20 degrees.”
Get Temperature: “Alexa, what is the DEVICE NAME temperature?”
Get Set Point: “Alexa, what is the upstairs set to?” Note: Alexa considers the smart thermostat and room names as the devices.

Google Home
Google Home is a brand of smart speakers that work similary to Amazon Echo. Google’s intelligent PA, Google Assistant, is equivalent to Amazon’s Alexa. Google Home is also available on all Android devices and does not require the use of the ‘Smart Speakers’.
The user can speak a profusion of commands to request information, or ask the Google Assistant to perform an action such as play music, video playback, report news, access home automation. All of this can all be controlled from a Google Home device. Common commands for Google Home

Listed below are common commands used with Google Home:

Discover Devices: “Hey Google, discover devices.”
Reduce Temperature: “Hey Google, decrease the DEVICE NAME by 4 degrees” / “Hey Google, make it cooler in here.”
Increase Temperature: “Hey Google, increase the DEVICE NAME by 3 degrees” / “Hey Google, make it warmer in here.”
Set Temperature: “Hey Google, set the DEVICE NAME to 20 degrees.”
Get Temperature: “Hey Google, what is the DEVICE NAME temperature?”
Get Set Point: “Hey Google, what is the upstairs set to?”

Note: Google home considers the smart thermostat and room names as the devices.

Set an automation scenarios linkage

lf you have a door sensor installed in your home, then you can realize an automation scenarios linkage between TRV and door sensor.

Under “Automation” in the “Smart” page, click “+” on the upper right comer, you will see a page called Create Smart that will guide you through the setting.
Here, we take When device status changes setting.
After you click When device status changes, you will see all the devices you added to the Tuya Smart app.
Select Smart Door Sensor->Select Function-> Smart Door Sensor->ON/OFF->Set up Task-> Run the device->TRV->Open Window Detection ->ON/OFF-> Save->Next-> Save.
A prompt box “Automation created.Start using it?” will pop up, select “Yes”, you can see all the automation scenarios you’ve created.
When the door/window sensor is opened, the Tuya Smart app interface will pop up a message that the door/window sensor is turned, and an ( ) icon will appear on the TRV device interface.
When the door/window sensor is closed, the Tuya Smart app interface will pop up a message that the door/window sensor is tumed oﬀ, and an ( ) icon will disappear on the TRV device interface.

Low Battery
When the battery power is less than 12%, the low power prompt icon ( )will be displayed. Please replace the battery as soon as possible, When the screen displays( )the device is not available.

Reset
The device operation: Press the “+” and “-” buttons for 5 seconds to enter the reset mode, and the screen will display “FAC”

Press the menu button to conﬁrm.
Press the boost button to exit.
After the device runs reset, the data will not be saved,the device will automatically connect to the gateway.

Troubleshooting and maintenance

Error code on display	Problem	Solution
Battery symboly	Battery output too low	Replace batteries
F1	Valve drive sluggish	Check installation, check the heating valve
F2	Actuating range too wide	Please check the fastening of the radiator thermostat
F3	Actuating range too small	Please check whether the valve pin is stuck

Technical Data

Batteries: 2×1.5 V LR6/mignon/AA
Battery life: 1.5 years
Temperature range: 5-30°C
Degree of protection: Ip20
Display: LCD with LED
RF: ZigBee
Frequency: 2.4GHz
Maximum radiated power: 10dBm Dimensions(W xHx D): 55.3×54×98.3 mm Weight: 190g(ind. batteries)
Working temperature: -10°C~40°C
Working environment: Indoor
Safety: CE/ROHS

Package contents

ZigBee Radiator Thermostat
AA batteries
Adapters for Danfoss(RA, RAV and RAVL)、 M28x1.5mm、Caleﬃ、Giacomini、Ejector rod Screw for adapter
Operating manual

Safety Information

Do not disassemble, reassemble, modify, or attempt to repair the product by yourself. If there iare any issues, please contact the company’s professional maintenance.
The product’s battery should be recycled or disposed of separately from household waste according to local environmental regulations.

Storage
Products should be put in the warehouse where the temperature is between the range -10℃ ~ +40℃,and the relative humidity ≤ 70%RH, indoor environment with no acid, alkali, salt and corrosive, explosive gas, ﬂammable matter, protected from dust, rain and snow.

Instructions for disposal

Do not dispose of the device with regular domestic waste
Electronic equipment must be disposed of at local collection points for waste electronic equipment in compliance with the Waste Electrical and Electronic Equipment Directive.
The device is not a toy, do not allow children to play with it. Do not leave packaging material lying around.
Plastic ﬁlms/bags, pieces of polytyrene, etC. can be dangerous in the hands of a child.
Used batteries should not be disposed of with regular domestic waste! Instead, take them to your local battery disposal point.
This device complies with the EN62368/EN300328/EN301489 of the CE Rules.
This device complies with the ROHS 2.0 Rules.

SERVICE

Thank you for your trust and support to our products, we will provide you with a two-year worry-free after-sales service (freight is not included), please do not alter this warranty service card, to safeguard your legitimate rights and interests. If you need service or have any questions, please consult the distributor or contact us. Product quality problems occur within 24 months from the date of receipt, please prepare the product and the packaging, applying for after-sales maintenance in the site or store where you purchase; If the product is damaged due to personal reasons, a certain amount of maintenance fee shall be charged for repair.

We have the right to refuse to provide warranty service if:

Products with damaged appearance, missing LOGO or beyond the service term
Products that are disassembled, injured, privately repaired, modiﬁed or have missing parts
The circuit is burned or the data cable or power interface is damaged
Products damaged by foreign matter intrusion (including but not limited to various forms of ﬂuid, sand, dust, soot, etc.)

RECYCLING INFORMATION
All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To ﬁnd out where these collection points are and how they work, contact the installer or your local authority.

EVATOST CONSULTING LTD

Address: Suite 11, First Floor, Moy Road Business Centre, Taﬀs Well, Cardiﬀ, Wales, CF15 7QR
Tel: +44-292-1680945
Email: contact@evatmaster.com
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China

Manufacturer:

WENZHOU NOVA NEW ENERGYCO.,LTD Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com

REFERENCE

DOWNLOAD MANUALS:

MOES TV01 Radiator Thermostat User Guide

wpx_thermostats

Next ONNDO TRV06 Radiator Thermostat User Manual »

Previous « PNI PT38R Underfloor Heating THERMOSTAT User Manual

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

2 years ago

Honeywell

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

2 years ago

HETTA

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

2 years ago

Heat-Mat

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

2 years ago

Honeywell

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

2 years ago

Honeywell

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

2 years ago

MOES TV01 Radiator Thermostat User Guide