Lux

Lux KONOzw Smart THERMOSTAT Specification Guide

Lux KONOzw Smart THERMOSTAT

Description

KONOzw is the smart thermostat made with you in mind. It seamlessly connects to many of the latest control panels from DSC, Tyco, and Qolsys. KONOzw blends in or stands out with its interchangeable Décor-snap covers™. KONOzw makes it easier than ever to personalize your comfort, décor, and savings.

System

  • Modes: Heat, Cool, Heat & Cool
  • Conventional: Forced air, gas, oil & electric furnaces (up to 2h/1c)
  • Heat Pumps: With or without Aux/Emergency heat
  • Hydronic (hot water) zone valves (2 wire)
  • Power: 4 AA alkaline batteries (included), C-wire or LUX Power Bridge (sold separately)

ZWAVE Plus Profile

  • Role Type: Listening Sleeping Slave (LSS)
  • Device Type: Thermostat – HVAC
  • Security: S2
  • OTA Upgrade: Supported
  • Supporting Documents:
    For additional documentation, manufacturer-specific commands or gateway support, please contact engineering@luxproducts.com

Integrates w/ Interactive Services:

  • Alarm.com®, Securenet®

Works w/ the latest smart control panels from Tyco | DSC & Qolsys:

  • PowerSeries*
  • PowerSeries Neo*
  • iotega panels
  • PowerSeries Pro*
  • IQ Panel 2 Plus
    • Requires Alarm.com communicator

Accessories*

  • Décor-snap M Covers are Available Separately
  • Latest available covers can be found at your local distributor

SPECIFICATIONS

(subject to change)

Dimensions Height: 4.5″ (114.3 mm), Width: 4.5″ (114.3 mm),

Depth: 1.0″ (25.4 mm)

Heat/Cool Terminals Heat: 2 total (W, Y, G, W2/O/B, C, RH, RC, LPB)

Cool: 1 total (Y1)

Electrical Ratings Voltage Range: 20-30V AC

Max Avg. Current Draw: 120mA at 24V AC or 4 x

AA alkaline battery

Output Rating: @24V a.c. Max. 1.5A, 4.2A resistive load combined load

Temperature Control Range Control Range: 50F to 90F (10C to 32C) Display Range: 32F to 99F (0C to 37C)
Environmental Limits Operating Limits: 14F to 122F (-10C to 50C) Storage Limits: -4F to 140F (-20C to 60C) Operating Humidity: 20% to 80% non-condensing Moisture and Dust: Up to IP20
ZWAVE Specifications ZWAVE Plus

Frequency: 908 MHz

Max Transmission Power = +4dBm

Compatible With Universal compatibility with forced air, gas, oil and electric furnaces up to 2h/1c, heat pump systems with or without aux/emergency heat and hydronic (hot water) zone valves (2 wire)
Not Compatible With 120V/240V line voltage systems
Packaging Master Carton: 4 Units
Other Technical Disconnection Means: Type 1B Pollution Degree: 2

Impulse Voltage: 330V

Automatic Action: 100,000 cycles

Pro.LuxProducts.com

References:

Download Manual

Lux KONOzw Smart THERMOSTAT Specification Guide

OTHER MANUAL

Lux KONOzw Smart THERMOSTAT Installation Manual

Lux KONOzw Smart THERMOSTAT Operation Guide

Lux KONOzw Smart THERMOSTAT Specification Guide

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago