Lux KONOzw Smart THERMOSTAT
Description
KONOzw is the smart thermostat made with you in mind. It seamlessly connects to many of the latest control panels from DSC, Tyco, and Qolsys. KONOzw blends in or stands out with its interchangeable Décor-snap covers™. KONOzw makes it easier than ever to personalize your comfort, décor, and savings.
System
- Modes: Heat, Cool, Heat & Cool
- Conventional: Forced air, gas, oil & electric furnaces (up to 2h/1c)
- Heat Pumps: With or without Aux/Emergency heat
- Hydronic (hot water) zone valves (2 wire)
- Power: 4 AA alkaline batteries (included), C-wire or LUX Power Bridge (sold separately)
ZWAVE Plus Profile
- Role Type: Listening Sleeping Slave (LSS)
- Device Type: Thermostat – HVAC
- Security: S2
- OTA Upgrade: Supported
- Supporting Documents:
For additional documentation, manufacturer-specific commands or gateway support, please contact [email protected]
Integrates w/ Interactive Services:
- Alarm.com®, Securenet®
Works w/ the latest smart control panels from Tyco | DSC & Qolsys:
- PowerSeries*
- PowerSeries Neo*
- iotega panels
- PowerSeries Pro*
- IQ Panel 2 Plus
- Requires Alarm.com communicator
Accessories*
- Décor-snap M Covers are Available Separately
- Latest available covers can be found at your local distributor
SPECIFICATIONS
(subject to change)
Dimensions | Height: 4.5″ (114.3 mm), Width: 4.5″ (114.3 mm),
Depth: 1.0″ (25.4 mm) |
Heat/Cool Terminals | Heat: 2 total (W, Y, G, W2/O/B, C, RH, RC, LPB)
Cool: 1 total (Y1) |
Electrical Ratings | Voltage Range: 20-30V AC
Max Avg. Current Draw: 120mA at 24V AC or 4 x AA alkaline battery Output Rating: @24V a.c. Max. 1.5A, 4.2A resistive load combined load |
Temperature Control Range | Control Range: 50F to 90F (10C to 32C) Display Range: 32F to 99F (0C to 37C) |
Environmental Limits | Operating Limits: 14F to 122F (-10C to 50C) Storage Limits: -4F to 140F (-20C to 60C) Operating Humidity: 20% to 80% non-condensing Moisture and Dust: Up to IP20 |
ZWAVE Specifications | ZWAVE Plus
Frequency: 908 MHz Max Transmission Power = +4dBm |
Compatible With | Universal compatibility with forced air, gas, oil and electric furnaces up to 2h/1c, heat pump systems with or without aux/emergency heat and hydronic (hot water) zone valves (2 wire) |
Not Compatible With | 120V/240V line voltage systems |
Packaging | Master Carton: 4 Units |
Other Technical | Disconnection Means: Type 1B Pollution Degree: 2
Impulse Voltage: 330V Automatic Action: 100,000 cycles |
References:
Download Manual
Lux KONOzw Smart THERMOSTAT Specification Guide
OTHER MANUAL
Lux KONOzw Smart THERMOSTAT Installation Manual
Lux KONOzw Smart THERMOSTAT Operation Guide
Leave a Reply