Lowenergie Programmable Plug-in Thermostat
BUTTON FUNCTIONS
This Plug-in thermostat is intended for use with electric heaters.
Keys Features
- Plug in design make it easy to install.
- Five buttons make it easy to operate.
- 7 days programmable
- Comfort, Energy-saving, and Holiday Mode Selectable.
- The display shows the set temperature.
- Temperature display in degrees Celsius.
- With EEPROM
- Frost Protection
Technical Data
- Output Voltage: 230V
- Switching Capacity: 3000W/ 13A
- Backup storage: EEPROM
- Sensor Mode: Internal Sensor
- Temperature settings: 5°C ~ 60°C, 0.5°C increments.
- Accuracy: +/- 0.5°C (+/- 1°F).
- Thermostat dimension: 70 mm x 41.5 mm x 140mm.
- Color: White
- IP protection rating: 20.
- Certification: CE.
Parameter Settings
Under off status, press the “M” button and “+” button at the same time can into the parameter setting. Each press of the “M button can move to the next setting.
| No. | Item | Range |
| 01 | Temp. Calibration | -9℃ ～+9℃ |
| 02 | High Temp. Limit | 5℃ ～ 60℃ |
| 03 | Low Temp. Limit | 5℃ ～ 60℃ |
| 04 | Frost Protection | 5℃ ～10℃ |
| 05 | Dead Band | 0.5 ～2 |
| 06 | Heat pump protection | 0：OFF 1: ON |
| 08 | Software Version | ————– |
Mode Temperature Pre-set.
The Mode temp. Can be set as following steps:
- Press and hold the M button for around 3 seconds. The COMFORT mode (Pic. A) display..
- Change the mode temperature with the + and – buttons.
- Press the M button, and the Energy-saving mode display (Pic. B).
- Change the mode temperature with the + and – buttons.
- Press the M button, and the holiday mode display (Pic. C).
- Change the mode temperature with the + and – buttons.
- The comfort function is displayed as a symbol (e.g. 25.5°C).
- The energy-saving function is displayed as a symbol (e. g. 20.5°C).
- The holiday function is displayed as a symbol (e.g. 10°C).
Day, Time, and PRG. Setting.
The thermostat provides the option to program 23-time settings, irrespective of the day, i.e. a total of 161 switching programs per week. These are shown in the display with a series of figures at the up and bottom of the display.
- You have already set the temperature value beforehand: (see page 2, mode temperature pre-set).
- The comfort function is displayed as a symbol (e.g. 25.5°C).
- The energy-saving function is displayed as a symbol (e.g. 20.5°C)
Set the time, day, and program with the following steps.
- Press and hold the P button for around 3 seconds. The minute’s display (A) flashes.
- Change this value using the + and – buttons.
- Press the P button. The hour display (B) flashes.
- Change this value using the +and – buttons.
- Press the P button. The day display (C) will flash as a number.
- Change this value using the + and – buttons. Use 1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday and 7 for Sunday.
- Press the P button. The switch program (D) and mode icon(F) flash.
- Set the program using the + and – buttons. Use the M button to change the mode. Comfort Mode( ) and Energy-saving mode( ).
- Press the P button after making the desired setting for this day, it will automatically skip to the next day, you have the option of skipping to another day by pressing the P button.
- After all, days of setting, the thermostat will keep the setting and back to the main menu.
Dimension
Reference
Download Manual:
Lowenergie Programmable Plug in Thermostat User Manual
Lowenergie Programmable Plug in Thermostat User Manual