Genebre 3917 Heat – Cool Digital Thermostat Product Specification Guide

Genebre 3917 Heat – Cool Digital Thermostat

Features

• Heat / cool thermostat
• 7 days programmable
• Surface mounting
• CE, Rohs approved

Technical Data

• Power supply: 2*AAA battery
• Relay contact: 250 VAC (0,25A)
• Set Point Range: 5ºC – 35ºC (0.5 ºC increase)
• Ambient: 0ºC ~ 50ºC
• Relative Humidity: 85%
• Backlight: White
• Sensor: NTC 10K
• Accuracy: ± 1ºC
• Protection Class: IP30
• Housing: ABC+PC

Display

1. Weekday
2. Clock
3. Child lock
4. Heating on
5. Manual mode
6. Program mode
7. Away mode
8. Heating mode
9. Cooling mode
10. Cooling ON
11. Window opened mode
12. Current program period

Child lock
Under child lock ON (refer to Menu 11 of parameter Setting), the buttons will lock once backlight off. Press and hold the SET button for 5s to unlock it for temporary adjust

Mode select

Short Press SET button to select between Heating Mode & Cooling Mode. Short press PRG button to select between MAN Mode & PRG Mode

• Heat mode: Cool mode
• Heating on: Cooling on

Clock & Weekday Setting
 Press and hold SET button for 5s, set the clock (Min-Hour-Weekday) by pressing + and – button, each press of SET button will go to the next item setting

Description

• Clock setting – minute
• Clock setting – hour
• Weekday setting
• Pre-set temp. for away mode

7 Days Programmable Setting

• Press and hold PRG button for some time to enter program setting.
• Set the schedule (Weekday-Period-Start time-Temp.) by pressing + and – button, each press of PRG button will go to next item setting.

Example

Open Window Detect Function (OWD function)

When the Open Window mode is enabled in the parameter setting, the system will automatically stop heating when it detects a sudden drop of room temperature (2°C in 15 minutes as default). This is normally caused when a window or door is opened without turning off the heating device.The device will return to the previous mode of operation after 30mins, then disappear. Press any button will exit OWD function during the heating off period

Parameter setting

Under off mode, press and hold SET button and + button for 6 seconds to enter parameter setting. Each press of SET button will go to next item setting. Adjust the value by pressing + or – button.

WIRING DIAGRAM

INSTALLATION AND DIMENSION

Important information for correct disposal of the product

At the end of its working life, product must not be disposed of as urban waste. It must be taken to a special differentiated waste collection centers, set up by local authorities or to dealers providing this service. Disposing of an electric or electronic appliance separately avoids possible negative consequences for the environmental and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of electric and electronic appliances separately, the product is marked with a crossed-out wheeled dustbin.

GENEBRE

• GENEBRE S.A. · Avda. Joan Carles I, 46-48 · EDIFICIO
• Tel. +34 93 298 80 00/01
• Fax +34 93 298 80 06
• 08908 L’HOSPITALET DE LLOBREGAT Barcelona (Spain)
• e-mail: genebre@genebre.es
• internet: http://www.genebre.es

REFERENCE:

DOWNLOAD MANUALS:

Genebre 3917 Heat – Cool Digital Thermostat Product Speicifcationd Guide

OTHER MANUALS:

Genebre 3917 Heat – Cool Digital Thermostat Instruction Manual

Genebre 3917 Heat – Cool Digital Thermostat Product Specification Guide