CHILD LOCK
Under child lock ON (refer to menu 11 of parameter setting), the buttons will lock once backlight off. Press and hold the SET button for Ss to unlock it for temporary adjust.

Menu	Description	Range	Default value
01	Temp. calibration for internal sensor	-8oC – 8oC	0oC
02	Set Point Max.	5oC – 35oC	35oC
03	Set Point Min..	5oC – 35oC	5oC
05	Frost Protection Temp.	5oC – 15oC	5oC
10	Display Temp.	0: Room Temp. 1: Set Temp	0
09	Dead zone	0oC – 3oC	0oC
11	Child Lock	1: Lock 0: Unlock	0
12	Open window detect function	1: Enable 0: Disable	0
13	OWD Detect Time	2 – 30 min.	15 min.
14	OWD Drop temp. select (within detect time)	2,3,4oC.	2oC
15	OWD Delay time select (Return to previous working status)	10 – 60 min.	30 min.
17	Factory reset	0: No 1: Yes, and the press On/Off button for 5s. wait until thermostat restart	0

MODE SELECT
Short Press SET button to select between Heating Mode & Cooling Mode. Short press PRG button to select between MAN Mode & PRG Mode.

Heat mode: Cool mode
Heating on: Cooling on

CLOCK & WEEHDAY SETTING
Press and hold the SET button for 5s, set the clock (Min-Hour-Weekday) by pressing and – button, each press of SET button will go to next item setting.

Menu	Description
01	Clock setting: minute
02	Clock setting: hour
03	Weekday setting
04	Pre-set temp. for away mode

7 DAYS PROGRAMMABLE SETTING

Press and hold PRG button for some time to enter the program setting.
Set the schedule (Weekday-Period-Start time-Temp.) by pressing the + and • buttons, each press of PRG button will go to next item setting.

Example:

Period	1		2		3		4
	Time	Temp.	Time	Temp.	Time	Temp.	Time	Temp.
1,2,3,4,5 (Mon- Fri.)	7:00	22oC	8:30	19oC	17:00	22oC	22:00	19oC
6 (Sat.)	8:00	22oC	8:30	22oC	17:00	22oC	22:00	19oC
7 (Sun.)	9:00	22oC	8:30	22oC	17:00	22oC	22:00	19oC

OPEN WINDOW DETECT FUNCTION (OWD function)

When the Open Window mode is enabled in the parameter setting, the system will automatically stop heating when it detects a sudden drop of room temperature (2°C in 15 minutes as default). This is normally caused when a window or door is opened without turning off the heating device The device will return to the previous mode of operation after 30mins, then disappear. Pressing any button will exit the OWD function during the heating-off period.

PARAMETER SETTING

Under off mode, press and hold SET button and + button for 6s to enter parameter setting. Each press of SET button will go to next item setting. Adjust the value by pressing + or – button.

WIRING DIAGRAM

INSTALLATION AND DIMENSION

IMPORTANT INFORMATION FOR THE CORRECT DISPOSAL OF A THE PRODUCT
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to special differentiated waste collection centers, set up by local authorities or to dealers providing this service. Disposing of an electric or electronic appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of electric and electronic appliances separately, the product is marked with a crossed-out wheeled dustbin.

GENEBRE

Av. Joan Carles I, 46-48
08908 L’Hospitalet de Llobregat Barcelona (Spain)
Tel. +34 93 298 80 00/01 –
Fax +34 93 298 80 06
e-mail: genebre@genebre.es
www.genebre.es

REFERENCE:

DOWNLOAD MANUALS:

Genebre 3917 Heat – Cool Digital Thermostat Instruction Manual

OTHER MANUAL:

Genebre 3917 Heat – Cool Digital Thermostat Product Specification Guide

Genebre 3917 Heat – Cool Digital Thermostat Instruction Manual

wpx_thermostats

Next Genebre 3917 Heat - Cool Digital Thermostat Product Specification Guide »

Previous « elm leblanc TRL 7.26 RF Room Thermostat User Manual

Genebre 3917 Heat- Cool Digital Thermostat Instruction Manual