Welcome
Thank you for your purchase.
Your new thermostat will provide uniform and comfortable temperature control throughout every room in your property. We bring together technology, craftsmanship and the highest quality materials to provide you with a safe, reliable product combined with sleek, contemporary design.
Please read this installation/programming manual for comprehensive instructions on installing and operating your thermostat. Please also ensure a suitably qualified person installs your thermostat and complies with all local regulations.
The BHT-6000 range has been developed to control electric underfloor ,water heating or water/gas boiler systems. These units are designed for use in commercial, industrial, civil and domestic properties
WH: Water heating, 3A
UH : Electric floor Heating, 16A
GC: Water/Gas Boiler, 3A
L: Backlight
P: Weekly Programmable
N: Modbus Communication
B: BACnet Communication
W: Wifi
S2: Both internal sensor and floor external sensor
For example: THP-6000 GCLP
On Appearance
On Functionality
CAUTION: Electrical Shock or Equipment Damage Hazard. Can shock individuals or short equipment circuitry. Disconnect power supply before installation.
Note
Your thermostat is suitable for installation within a standard 86mm pattress box or European 60mm pattress box.
Step 1. Keep power off. See Fig 1.
Step 2. Remove the mounting Plate by rotating the LCD part. See Fig 2.
Step 3. Connect power supply, load into the appropriate terminals. (see “Wiring your thermostat” for details and Fig 3).
Step 4. Fix the mounting plate into the wall with screws in the box. See Fig 4.
Step 6. Installation complete. See Fig 6.
During Power On
Time display | WEEKDAY (MONDAY – FRIDAY) (1 2 3 4 5 shows on screen) | WEEKEND (SATURDAY) (6 shows on screen) | WEEKEND (SUNDAY) (7 shows on screen) | |||
TIME | TEMPERATURE | TIME | TEMPERATURE | TIME | TEMPERATURE | |
Period 1 | 06:00 | 20。C | 06:00 | 20。C | 06:00 | 20。C |
Period 2 | 08:00 | 15。C | 08:00 | 20。C | 08:00 | 20。C |
Period 3 | 11:30 | 。 15 C | 11:30 | 20 C | 11:30 | 。 20 C |
Period 4 | 13:30 | 。 15 C | 13:30 | 。 20 C | 13:30 | 。 20 C |
Period 5 | 17:00 | 22。C | 17:00 | 20。C | 17:00 | 20。C |
Period 6 | 22:00 | 15。C | 22:00 | 15。C | 22:00 | 15。C |
A separate schedule may be set for weekdays (Mon – Fri) and for weekends (Sat or Sun).
Setting the Functions and Options
When power is off, press and hold M and
Code | Function | Setting and options | Default |
1 | Temperature
| -7 to 7。C | -1 |
2 | Fan control | 00:When room temp. reaches the set point,the fan will turn off 01:When room temp. reaches the set point,the fan will turn to low speed | 0 |
3 | 01 | ||
4 | Heat/cool | 00:Cool only 01:Heat/Cool | 01 |
5 | Min. Set Temp. | 5 to 15。C | 05 |
6 | Max. Set Temp. | 5 to 35。C | 35 |
7 | 12/24 hours | 00:12h 01:24h | 01 |
8 | Display Mode | 00:Display both set temp. and room temp. 01: Display set temp. only | 00 |
9 | Energy saving Mode | 00: Non-energy saving Mode 01: Energy saving Mode,set Temp. keep economy Temp. | 00 |
A | Temp. | 10 to 30。C | 20 |
B | Cooling Economy Temp. | 10 to 30。C | 26 |
C | Deadband Temp. | 1 to 5。C | 1 |
D | Standby Bightness of backlight | 3-99 bigger value,more brightness | 4 |
WI-FI CONNECTION
Before using your Wi-Fi thermostat for the first time,you must configure the Wi-Fi signal and settings through your smartphone or tablet This will allow communication between your connected devices
Then, go back to the home page of your app
Press the + on the upper right corner of the page (see Fig 3-1) to add your device. Click Confirm indicator rapidly blink (Fig 3-2) then select your network and back to your app to enter the password of your wireless router (Fig 3-3) and confirm. The app will connect automatically (Fig 3-4). This may typically take up to 5~90 seconds to complete. Your room name could be edited when the device is connected (Fig 4-4).
This is EZ mode which provides fast network connection between your app and your device. If your router doesn’t support it or your wifi signal is weak or you can not connect by EZ mode, press the AP Mode
on the upper right corner in Fig 3-2
If you have connected your thermostat successfully, please ignore the AP setting as below.
On your thermostat
Then, go back to the home page of your app
Click Confirm indicator slowly blink (Fig 4-1) then select your network and back to your app to enter the password of your wireless router (Fig 3-3) and confirm. The app will go into the page in Fig 4-2
PROGRAMMING YOUR THERMOSTAT
When your room is established successfully, it will display on the home screen (Fig 5-1). The round button is to turn on/off your room. Click the line into begining programming your thermostat.
Slide the yellow button backwards or forwards to manually adjust the temperature, the temperature will show in the center of the page. After a few seconds the current room temperature
will show.
How to create a group?
Press the menu button in the red circle (Fig 5-2) then click Create Group (Fig 6-1). Select all the rooms you want and confirm.
The one who create this group can control all the rooms at the same time.
Note: Except create the group, in this menu page, you can also modify your device name, share your device, get information of your device.
How to share your device with your family member?
Select Device Sharing then add the account you want to share. You can see the sharing account you have sent and the device you have shared in this sharing page. You don’t need to do anything if you are the one shared. You can add as many as rooms you want.
How to connect your device to Amazon Echo or Google Home?
In your profile, click Integration into the using page. Press Use Now > (Fig 7-1) for your Amazon Echo or Google Home or Tmall Genie or IFTTT then you can see the operation steps.
What is your Smart Scene and How to use it?
Customize your own personal scenes to suit your needs. For example, set your home to automatically turn on thermostat on when you back home (Fig 7-2).Press + button into the setting
NOTE: The room sound could be turned on/off in PROFILE-SETTING- SOUND. The sound is matched with the default of your system.
No. | Phenomenons | Handling |
1 | Power is on but without display. | * Check if the terminals between LCD panel and Power Unit Box is loosen. |
2 | Without output but display works. | * Use a new LCD panel or new Power Unit Box to replace the old one. |
3 | Room Temp. Is a little different from the actual. | * Do temperature calibration in item 1 of high senior options |
SERVICE
Your thermostat carries an 24 months warranty from date of purchase. Service outwith the warranty period may incur a charge. More detail please contact with us directly.
DOWNLOAD MANUALS:
Elechico THP-6000 GCLP Programmable WIFI Thermostat User Guide
Elechico THP-6000 GCLP Programmable WIFI Thermostat User Guide
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…