Eberle RTR-E 3521 Indoor thermostat Operationg Instruction

Eberle RTR-E 3521 Indoor thermostat

INTRODUCTION

Mounting and operating instructions for room thermostats

This unit must be mounted by an expert, according to the wiring diagram inside the housing cover. The existing safety regulations must be observed. Ö Will be met by corresponding installation (acc. to VDE 0100) and by fitting on a smooth and non-conductive and non-flammable surface. This electronic or electromechanical room temperature controller which can be mounted independently is for controlling normal ambient temperature in dry, enclosed rooms only. It has radio interference suppression in accordance with VDE 0875 or EN 55014 and operates to efficiency 1 C. The switching point is lower when the temperature control knob is turned than in automatic operation. The exact switching point is reached only after a climatization period of approx. 1-2 hours.

• Relative humidity . . . . . . . . . . . . . . . . . . . . . . . max. 95 % without condensation
• Rated impulse voltage . . . . . . . . . . . . . . . . . . . . 4 KV
• Brinell test temperature . . . . . . . . . . . . . . . . . . . 75°C
• Voltage and current for EMC emitted . . . . . . . . . 230 V; 0.1 A
• interference testing

Symbol

Accessories

Reference

Download Manual:

Eberle RTR-E 3521 Indoor thermostat Operating Instruction

Eberle RTR-E 3521 Indoor thermostat Operating Instruction