Eberle AZT-A 524 510 Thermostat Installational Instruction

Eberle AZT-A 524 510 Thermostat

APPLICATION

this thermostat is for controlling heating or cooling  in damp or cooling in damp or dusty rooms e.g. garages, store rooms, toilets, stables, laundries e.t.c

MOUNTING

the control should be mounted on an aside wall approx 5 from floor level (1.6m) avoid draughts and direct heat from radiator sunshine or heated walls (airing  cupboard or chimney breasts) for external mounting the north side of houses is preferred if this is not  possible the control must be shielded from direct sunlight wind and rain

WIRING  DIAGRAM

TECHNICAL DATA

order no.    comp no.   temp range

Controller With External Adjustment 

SEALING THE HOUSES

• The top right hand cover screw can be replaced by  a special screw with  a longer head and with a hole drilled through its diameter (screw supplied separately )
• Pass a thin wire through his hole and also the channel in the face of the lid and seal the two ends in the normal manner

ATTENTION

• The equipment may  only  be installed and/or mounted by an expert  according to  the existing safety regulations
• Possible applications and dimensions particularly technical data may  be found in our technical leaflets

Reference

Download Manual:

Eberle AZT-A 524 510 Thermostat Installational Instruction

OTHER MANUALS:

Eberle AZT-A 524 510 Thermostat Product Specifications Guide

Eberle AZT-A 524 510 Thermostat Installational Instruction