Delta Dore

Delta Dore TYBOX 117 Wireless Room Thermostat Installational Guide

Delta Dore TYBOX 117 Wireless Room Thermostat

Important product information

  • Press time
  • Room temperature
  • Set-point temperature
  • Daily programming
  • Weekly programming

AUTO

Turn the selector dial to AUTO. Your thermostat follows the programme. Depending on the configuration during installation, your device will constantly display the temperature setting or the room temperature. To change these settings, refer to the»installation guide» or contact your installation engineer.

Information button
In AUTO mode, pressing the i button displays the room temperature or the temperature setting, depending on the configuration during installation.

Time setting

Set-point Temperature Setting

Manual mode

This mode is used to choose a set-point temperature that remains constant. Turn the selector dial to . To cancel the current manual mode, turn the selector dial

Override

In automatic mode, manual override can be used to switch from Comfort to Economy (or vice versa) until the next change of programme

E.g.: it is 15:30 and you would like to switch to Comfort mode before the set time (17:00).

If you wish to cancel the override that is currently active, press the button again. At 5pm, the programme will return to the normal schedule.

PROG

Turn the selector dial to PROG. Create your 24-hour programme The programme may be weekly (PROGx7) or daily (PROGx1). This choice is made using the switch on the back of the device. This programming can also be done in one-hour, halfhour, or quarter-hour stages. If you wish to change these settings, refer to the «installation guide» or contact your installation engineer

PROG x1

Confirm and continue on to the next day to program it separately or confirm the program and copy it to the next day.

PROG x7

The programming may be done in increments of one hour, 30 minutes, or 15 minutes (refer to the “installation guide”, menu 1-02).

INSTALLATION INSTRUCTIONS

POWER ON/OFF

This mode is used to switch your heating installation off. Turn the selector dial to . In this mode, the device displays the room temperature.

BATTERY INSTALLATION
When the batteries symbol appears. you have approximately 1 month to change the batteries (2 1.5 V LR03 or AAA alkaline batteries).

You have approximately 30 seconds to change the batteries before the time setting is reset (if this happens, reprogramme the date and time).

www.deltadore.com

Reference

Download Manual:

Delta Dore TYBOX 117 Wireless Room Thermostat Installational Guide

Delta Dore TYBOX 117 Wireless Room Thermostat Installational Guide

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago