Danfoss Devireg 530M Electronic Thermostat Data Sheet

Danfoss Devireg 530M Electronic Thermostat

Instructions

The DEVIreg™ 530 is a simple electronic thermostat with a 2-pole switch to be installed directly on the wall, using a floor sensor (wire) to measure and control the desired floor temperature (max. limit 35° C). It can be either flush-mounted or surface-mounted. The thermostat has a dial for adjusting the temperature setting with a scale from to 6. Furthermore, the thermostat has an LED indicating the current mode (heating, standby or fault).

Benefits: •              2-pole safety breaker •              Low standby consumption •              Max. temperature limit 35° C •              Sensor failure monitoring •              LED indication for fault •              Frost protection   Standard compliance: •              EN/IEC 60730-1 (general) and EN/IEC 60730-2-9 (thermostat)   approvals:    B d	Type	Value
	Operation voltage	220 V- 240V~ 50/60 Hz
	Standby power consumption	max. 0.25 W
	Relay: Resistive load Inductive load	Max 15A / 3450W @ 230V Cos Φ = 0.3 max. 1A
	Sensing unit	NTC 15 kOhm at 25° C
	Hysteresis	± 0.4° C
	Ambient temperature	-10° C. to +30° C
	Temperature range	15-35°C with floor sensor only
	Cable specification max	1 x 4 mm2 or 2 x 2,5 mm2
	Ball pressure test temperature	75° C
	Pollution degree	2 (domestic use)
	Controller type	1 C
	Storage temperature	-20° C to +65°C
	IP class	31
	Protection class	Class II –
	Dimensions (H/W/D)	85 mm x 85 mm x 36 mm
	Weight	90 g

Types

Item no.	Product name	Type	EAN no.
140F1101	DEVIreg™ 530	With floor sensor and ELKO frame	5703466210406

REFERENCE

Download Manual

Danfoss Devireg 530M Electronic Thermostat Data Sheet

OTHER MANUALS

Danfoss Devireg 530M Electronic Thermostat Installation Guide

Danfoss Devireg 530M Electronic Thermostat Data Sheet