Danfoss Devireg 530M Electronic Thermostat
Instructions
The DEVIreg™ 530 is a simple electronic thermostat with a 2-pole switch to be installed directly on the wall, using a floor sensor (wire) to measure and control the desired floor temperature (max. limit 35° C). It can be either flush-mounted or surface-mounted. The thermostat has a dial for adjusting the temperature setting with a scale from
to 6. Furthermore, the thermostat has an LED indicating the current mode (heating, standby or fault).
| Benefits:
• 2-pole safety breaker • Low standby consumption • Max. temperature limit 35° C • Sensor failure monitoring • LED indication for fault • Frost protection
Standard compliance: • EN/IEC 60730-1 (general) and EN/IEC 60730-2-9 (thermostat)
approvals: B d |
Type | Value |
| Operation voltage | 220 V- 240V~ 50/60 Hz | |
| Standby power consumption | max. 0.25 W | |
| Relay: Resistive load Inductive load |
Max 15A / 3450W @ 230V Cos Φ = 0.3 max. 1A |
|
| Sensing unit | NTC 15 kOhm at 25° C | |
| Hysteresis | ± 0.4° C | |
| Ambient temperature | -10° C. to +30° C | |
| Temperature range | 15-35°C with floor sensor only | |
| Cable specification max | 1 x 4 mm2 or 2 x 2,5 mm2 | |
| Ball pressure test temperature | 75° C | |
| Pollution degree | 2 (domestic use) | |
| Controller type | 1 C | |
| Storage temperature | -20° C to +65°C | |
| IP class | 31 | |
| Protection class | Class II – | |
| Dimensions (H/W/D) | 85 mm x 85 mm x 36 mm | |
| Weight | 90 g |
Types
| Item no. | Product name | Type | EAN no. |
| 140F1101 | DEVIreg™ 530 | With floor sensor and ELKO frame | 5703466210406 |
REFERENCE
Download Manual
Danfoss Devireg 530M Electronic Thermostat Data Sheet
OTHER MANUALS
Danfoss Devireg 530M Electronic Thermostat Installation Guide