CUHeating

CUHeating CON1LY3O6 Digital Touch Screen Thermostat Instruction Manual

CUHeating CON1LY3O6 Digital Touch Screen Thermostat

Changing the Standard Temperature

  • Use the arrows to select the currently required temperature.
  • Select the button to confirm.
  • If successful you will hear a clicking sound and a will appear on screen, informing you the system is warming up.
  • If you have turned the system down, the will not appear, but this is normal.

Select the Date and Time

  • Select to open the menu.
  • The box around the should be flashing.
  • Select again.
  • Use the Land arrows to select the current day.
  • Select after highlighting to days date.
  • Select the hour using the Land arrows (the thermostat is set for 24-hour time).
  • Select again after finding the correct hour.
  • Use the Land arrows to select the current minute.
  • Press to to return to the menu, your time has now been set.

Holiday Mode

  • Select to open the menu.
  • Use the Band arrows to navigate to ‘HOLIDAY
  • Select again
  • use the Land arrows to select how many days you will be away. You should set the thermostat until the day before you return, this is so that when you arrive home on the day the system will be running on Its standard setting.
  • Select to confirm the selection.
  • Use the Land arrows to select the minimum temperature to keep your home while you are away.
  • Selecf to confirm the temperature.
  • Your holiday mode has been set.

Cancelling Holiday Mode

  • Select to open the menu.
  • • Use the Land arrows to navigate to ‘HOLIDAY’
  • • Select Again
  • • Use the arrow to select O days.
  • • Select to confirm the selection.
  • • Your holiday mode has been Cancelled.

Turning On Hold Mode

  • Turn the thermostat on with
  • Select to open the menu.
  • Press the arrow to navigate to ‘HOLD’.
  • Select to confirm
  • Use the or arrow to change the mode from ‘OFF’ to
  • Select to confirm
  • Use the and arrows to select a temperature to maintain the system.
  • This mode will hold your temperature permanently, even if you have a scheduled temperature change. This function will overwrite that and maintain the set temperature.

Cancelling Hold Mode

  • Select to open the menu.
  • Press the and arrows to navigate to ‘HOLD’.
  • Select to confirm
  • Use the arrows to change the mode from ‘ON’ to ‘OFF’.
  • Select to confirm.

Advanced Set-Up

l •                ·e l),          It 1p1
1 Air temp ca11oration u-t.; -o-t.; – oyc
2 Floor temp calibration 0°C -5°C – 5°C
3 Frost protection enable On OF (Off)

ON

4 Frost protection limit 5 s0    c  – 1s0    c
5 Sensor selection 01:Floor Sensor uu: Air Sensor

01: Floor Sensor

02: Air & Floor Sensor

6 Floor temoerature limit 30°c -20°C – 50°C
7 Temperature format 00: °C 00: °C

01: °F

8 Output delay 0 seconds 00:00s

01:30s

02:60s

03:90s

9 Switching differential 01: 1°C 00: 0.5°C

01: 1.0°c

02:2.0°c

03:3.0°C

10 Reverse output 00: Off 00: Off

01: On

11 Schedule Ul:5+1+1 uu: 7 day

01: Weekday, Sat, Sun (5+1+1)

12 Optimum start 00: Off 00: Off

01: On

13 Reset to factory settings uu: No uu: On

01: Reset

Error Codes
El = Built-in sensor error
E2 = Floor sensor error

Scheduling

The schedule for this thermostat must be set manually for all 7 days of the week.

  • Turn the thermostat on with
  • Select O to open the menu.
  • Press the arrow twice until the ‘EDIT’ box is flashing.
  • Select O to confirm
  • Use the and Varrows to select the day of the week you wish to change.
  • Select O to confirm your selection.
  • There are now four settings to select:
  • Select which setting you would like to change using the arrows. Click the button to select.
  • Select the hour you want the setting to start using them and the arrows. Click the O button to select.
  • Then select the minute you want the setting to start using the Land arrows. Click the O button to select.
  • Finally, select the temperature using the Band arrows and click the O button to confirm.
  • You will then automatically be moved to the next section for the same day.
  • To move up a menu layer, select the button.
  • Complete all 7 days this way to complete your schedule.

Wiring Instructions

COMFORTUNDERFLOORHEATING.CO.UK

SALES@COMFORTUNDERFLOORHEATING.CO.UK
0800 023 26 28

REFERENCE:

DOWNLOAD MANUALS:

CUHeating CON1LY3O6 Digital Touch Screen Thermostat Instruction Manual

CUHeating CON1LY3O6 Digital Touch Screen Thermostat Instruction Manual

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago