CUHeating CON1LY3O6 Digital Touch Screen Thermostat Instruction Manual

Contents hide

CUHeating CON1LY3O6 Digital Touch Screen Thermostat

Changing the Standard Temperature

Use the arrows to select the currently required temperature.
Select the button to confirm.
If successful you will hear a clicking sound and a will appear on screen, informing you the system is warming up.
If you have turned the system down, the will not appear, but this is normal.

Select the Date and Time

Holiday Mode

Select to open the menu.
Use the Band arrows to navigate to ‘HOLIDAY
Select again
use the Land arrows to select how many days you will be away. You should set the thermostat until the day before you return, this is so that when you arrive home on the day the system will be running on Its standard setting.
Select to confirm the selection.
Use the Land arrows to select the minimum temperature to keep your home while you are away.
Selecf to confirm the temperature.
Your holiday mode has been set.

Cancelling Holiday Mode

Turning On Hold Mode

Turn the thermostat on with
Select to open the menu.
Press the arrow to navigate to ‘HOLD’.
Select to confirm
Use the or arrow to change the mode from ‘OFF’ to
Select to confirm
Use the and arrows to select a temperature to maintain the system.
This mode will hold your temperature permanently, even if you have a scheduled temperature change. This function will overwrite that and maintain the set temperature.

Cancelling Hold Mode

l	• ·e	l), It	1p1
1	Air temp ca11oration	u-t.;	-o-t.; – oyc
2	Floor temp calibration	0°C	-5°C – 5°C
3	Frost protection enable	On	OF (Off) ON
4	Frost protection limit	5	s0 c – 1s0 c
5	Sensor selection	01:Floor Sensor	uu: Air Sensor 01: Floor Sensor 02: Air & Floor Sensor
6	Floor temoerature limit	30°c	-20°C – 50°C
7	Temperature format	00: °C	00: °C 01: °F
8	Output delay	0 seconds	00:00s 01:30s 02:60s 03:90s
9	Switching differential	01: 1°C	00: 0.5°C 01: 1.0°c 02:2.0°c 03:3.0°C
10	Reverse output	00: Off	00: Off 01: On
11	Schedule	Ul:5+1+1	uu: 7 day 01: Weekday, Sat, Sun (5+1+1)
12	Optimum start	00: Off	00: Off 01: On
13	Reset to factory settings	uu: No	uu: On 01: Reset

Error Codes
El = Built-in sensor error
E2 = Floor sensor error

The schedule for this thermostat must be set manually for all 7 days of the week.

Turn the thermostat on with
Select O to open the menu.
Press the arrow twice until the ‘EDIT’ box is flashing.
Select O to confirm
Use the and Varrows to select the day of the week you wish to change.
Select O to confirm your selection.
There are now four settings to select:
Select which setting you would like to change using the arrows. Click the button to select.
Select the hour you want the setting to start using them and the arrows. Click the O button to select.
Then select the minute you want the setting to start using the Land arrows. Click the O button to select.
Finally, select the temperature using the Band arrows and click the O button to confirm.
You will then automatically be moved to the next section for the same day.
To move up a menu layer, select the button.
Complete all 7 days this way to complete your schedule.