BEOK TST32A Electrical Heating Thermostat Operating Instruction

BEOK TST32A Electrical Heating Thermostat

Product Summary

TST32A Touch Screen Period Programming Thermostat has Weekly circulation, it is possible to set 6 periods called events each day with corresponding pre-set temperatures, also you can select programmable mode or manual mode according to your individual requirements. The thermostat is recommended for the control of electric heating devices or on/off valve actuator used in water-based heating systems.

Technical Parameter

Display symbols

• Manual mode
• Programmable mode
• Wake-up.event 1
• Leave (am),event 2
• Return(am),event 3
• Leave(pm),event 4
• Return(pm),event 5
• Sleep ,event 6
• Heating on

User Interface Explanation

Model Definition

• EP: For Electric Floor Heating System, 16A
• For example: TST32A-EP

Model Spec

Wiring Diagram

Operation Instruction

• Power key “ ”
• The increase key“ ”and the decrease key “
• Time setting key “
• Mode selection key“
• Locking “ ”and unlocking
• Temperature and time display

Programming:6-event time and temperature

Key	Event		Symbol	Time		Default value
	Day1~5	1		06: 00	Set the start/end	20℃	Set progammed
		2		08: 00		15℃
		3		11: 30		15℃
		4		12: 30		15℃
		5		17: 00		22℃
		6		22: 00		15℃
	Day6~7	1		08: 00		22℃
		2		23: 00		15℃

Advanced Sattlng(quallflad parson preferred

Symbol		Function	Setting and options
	ADJ	Temperature calibration	Adjust measured temperature
2	SEN	Sensor mode	IN: built-in sensor OUT: floor sensor ALL: both sensors (floor sensor is the limit sensor)
3	LIT	Limitation temperature	Adjust limitation value, Limitation range:5-60°C
4	DIF	Switching differential	Adjust switching differential
5	LTP	Anti-frozen function	Turn on/off Anti-frozen function (Anti-frozen symbol only displays when room temp. is lower than 5°C)
6	PRG	Set vacation mode	2: 5/2 day mode 1: 6/1 day mode 0: 7 day mode
7	RLE	Potential-free output	00: in same way 01: in different way 02: in different way to main/aid relay 03: in different way to main/aid relay power off and anti-frozen, without output. (optional)
8	DLY	Potential-free output delay	Change the delay time (0-5min) (optional)
9	HIT	Max. temp.	Max. limitation temperature range (35-95°C)
10	AFAC	Reset to factory settings	Programming parameters will be reset to factory settings when symbol – – _ appears

TST32A-WARNING-lmportant Safety Instructions
Disconnect the power supply before carrying out any installation or maintenance work on this thermostat and associated components. The thermostat and associated components should only be installed by a competent person{i.e.a qualified electrician).Electrical installation must be in accordance with appropriate statutory regulations

Installation Instruction

X.ATT
 Please read this manual for complete Instructions on Installing and operating your thermostat. If you require further assistance, please feel free to contact us.

In The Box You will find

Model	TST32A-EP
Thermostat
User Manual
Screws
Dryer
External sensor

Our Service
We offer the warranty of 24 months from the sales day. During the warranty, if it is belong to the quality issue, we will fix or replace them for you by free after test them. If it is not quality problem or beyond the warranty time, we will charge for the after-sales service

Warning:
The symbol means the unit is being installed, it may cause electrical shock hazard during maintaining, so please make sure it is operated by the professional technical worker.

REFERENCE

DOWNLOAD MANUAL

BEOK TST32A Electrical Heating Thermostat Operating Instruction

 

BEOK TST32A Electrical Heating Thermostat Operating Instruction