BEOK TDR89 Glass Screen Thermostat Instruction Manual

BEOK TDR89 Glass Screen Thermostat

Product Summary

TDR89 series thermostats are luxurious programmable thermostats with large-screen display. It is applied to temperature control of the industrial, commercial and domestic room, and start of control heating appliance, especially used in floor-heating systems.

Technical Parameter

• Power Supply 100 ~ 240V
• Current Load ≤3A（water heating/gas boiler) / ≤16A(electric heating)
• Power Consumption <1W
• External Material PC+ABS (flame retardant）
• Sensing Element NTC
• Set Temp. Range 5-95℃
• Floor Set Temp. Range 5-60℃
• Accuracy ±1℃
• Dimension 86x90x14mm
• Ambient Temp. 0-45℃,5-95％RH(Non-condensing）
• Storage Temp. -5~55℃
• Timing Error <1％

Main Functions and Characteristics

1. Modern design same as a cell phone
2. Large screen display and touch button
3. Power-off memory function
4. Real-time data save function
5. 5+2 or 6+1or 7days six periods program schedule
6. Anti-freezing function
7. 3 sensor modes can be setting
8. Selectable 80mmx80mm European hidden box.
9. With child lock function

User Interface Explanation

Model Definition

• EP: For Electric Floor Heating System, 16A
• WP: For Water Floor Heating System, 3A
• WPB: For Gas Boiler Heating System, 3A

Model Spec

Model	Current Loading	External sensor	Week Program	Controlled Objects
TDR89-EP	16A	√	√	For electric heating appliances
TDR89-WP	3A		√	For water heating appliances
TDR89-WPB	3A		√	For gas boiler

Wiring Diagram

Thermostat Operation Instruction

1. Setting Power on/off
   Press to turn on/off the power.
2. Setting Temperature
   Press “+” or “–” to set the temperature.
3. Setting the Clock
   Long press and “+” to set minute, hour and week. Press “+” or “–” for adjusting.
4. Setting the Manual Mode.
   Manual mode means non-programmable mode. Press then will display in the screen, it is in manual mode. Press “+” or “–” to set the temperature.
5. Setting the Child Lock
   Long press “+” and “–” to enter into child lock mode, will display. Long press “+” and “–” again, the child lock will be disappeared.
6. Setting the Programmable Mode.
   • Press and hold into programmable mode. 12345 and time will display. 12345 display in the position of week means 5+2;
   • Press “+” or “–” to change the time.
   • Press to do the temperature adjustment.
   • Press “+” or “–” to change the temperature;
   • Press to do the next period adjustment.
   • Press to exit and save

Remark: The defaulted temperature of period3 and period4 is the same as period2. Please change it according to the request.

Advanced Setting

Display Code	Function	Setting And Options	Factory Default
1ADJ	Temp. compensation	-9.9-9.9℃	-2℃
2SEN	Sensor selection	IN: Internal sensor OUT: Floor sensor ALL: Both internal sensor and floor sensor	IN
3LIT	Modify the temp. limit	5-60℃	35℃
4DIF	Temp. difference start	0.5-10℃	1℃
5LTP	Antifreeze function	OFF: Close anti-frozen ON: Open anti-frozen	OFF
6PrG	Weekly programming mode	0: 7 days programmable 1: 6+1 programmable 2: 5+2 programmable	2
7rLE	Primary and secondary reverse selection	00: close the main and auxiliary  reversal 02: auxiliary reversal	00
8dLy	Passive linkage output delay time	0-5min	0
9HlT	Set upper temp. limit	35-95℃	60
RFAC	Restore factory defaults	long press up button to adjust the display “—”, press power button to restore the factory settings	–

Sensor error:
Please select the right sensor mode. If select a different mode or there is error of sensor, Err will display on the LCD screen, the thermostat will stop heating till the problem is solved.

Installation Instruction

This product is suitable for standard 80*80mm wall box and 60 mm european round box.

1. Connect the power box according to the wiring diagram.
2. Separate the power supply from the control board cable.
3. Screw the power supply into the box of 86.
4. Connect the power board to the board line, and align the buckle at 30 degrees to complete the installation.

ATT

Thank you for buying this product! Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, please feel free to contact us.

In the box you will find

Model	TDR89-EP	TDR89-WP	TDR89-WPB
Thermostat	√	√	√
User Manual	√	√	√
Screws	√	√	√
External sensor	√

Our Service:
During the warranty, if it is belong to the quality issue, we will fix or replace them for you by free after test them. If it is not quality problem or beyond the warranty time, we will charge for the after-sales service.

Warning: The symbol means the unit is being installed, it may cause electrical shock hazard during maintaining, so please make sure it is operated by the professional technical worker.

REFERENCE

DOWNLOAD MANUAL

BEOK TDR89 Glass Screen Thermostat Instruction Manual

BEOK TDR89 Glass Screen Thermostat