Quick Menu & Controls
You can access common ZoneTouch 3 features using the Quick Menu.
The percentage sliding bar will revert to the tile button if other buttons are touched or no actions are taken for 5 seconds.
A more advanced version of the Timer function is the Program function, letting you turn the airflow ON or OFF for your entire house or individual zones.
For high volumes of conditioned air in a single zone.
ZoneTouch’s Turbo Zone feature can condition a single zone quickly; or can be useful when there is a lot of activity and you need more conditioned air than normal.
ZoneTouch’s Favourites feature allows you to save your climate control scenarios.
The ZoneTouch 3 App can be downloaded free of charge.
Install the ZoneTouch 3 App through the Apple App Store or Google Play Store.
After downloading the application, run the app to control.*
ZoneTouch 3 is compatible with
ZoneTouch 3 console can only be connected to 2.4GHz network. Mobiles have to be on the same 2.4GHz as the console to run the ZoneTouch app.
Select time zone and set date and time.
Choose the background colour to suit the home décor. There are six different colours available.
Zones are re referred t ed to as Gro as Groups in Systoups in Syem Settingsts.em Settings.
Customise ZoneTouch’s Zone Names to suit your home.
The Screen Lock protects your ZoneTouch 3 from potential damage caused by children playing with the console.
It is set from the Preferences page
Owner’s Name is used by the mobile app to distinguish between ZoneTouch systems. The maximum length for a name is 16 letters.
Connect your ZoneTouch 3 to WiFi.
Software Updates
Local Access Password Protection
When enabled, mobile devices connected to the same WiFi Network as ZoneTouch will need to use the password to use the App.
Problem meets solution
Problem | Suggested Action |
Dampers have no response when turned on or off | Check if LEDs on the main module light up for relevant zones when the zone dampers are being turned On/Off. If Green/Red LEDs are not ON for the respective zone, the main module may be faulty, replace it. If there is response, there might be a faulty cable and the cable would have to be replaced. If the zone is still not functional then there might be a faulty damper motor. Check if the cable from touch-pad to the main control module is faulty. If it is a faulty cable, then replace the cable. Check Grouping and find out if the right zones have been assigned to the right groups and have been turned ON/OFF in Zoning section. |
Some zones cannot be turned off | Check if ‘Spill’ status is displayed for the zone. Opening other zones will rectify the error |
No display on the LCD | Check if the cable is plugged in properly. Unplug the cable and reconnect it. Check if there is power to the unit. |
Electrical Requirements
Environmental Requirements
Zone Output
Transformer
Liability and Disclaimer
All specifications and procedures are correct at time of publication, but are subject to change without notice. Please read the instructions before installing this Zone Control System. Polyaire Pty Ltd does not accept any responsibility for loss or damage that may occur as a result of the incorrect installation or operation of this AirTouch Control System.
Polyaire Pty Ltd 11-13 White Road Gepps Cross South Australia, 5094
© Polyaire Pty Ltd 2021 Edition 1, April 2021
Like us on Facebook at ‘facebook.com/meetAirTouch Subscribe to us on YouTube at ‘AirTouch’
Download Manual
Airtouch Zonetouch 3 Thermostat User Manual
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…