Airtouch Zonetouch 3 Thermostat
Console![Airtouch-Zonetouch-3-Thermostat-fig-1](https://thermostat.guide/wp-content/uploads/2023/02/Airtouch-Zonetouch-3-Thermostat-fig-1.png)
Mobile App![Airtouch-Zonetouch-3-Thermostat-fig-2](https://thermostat.guide/wp-content/uploads/2023/02/Airtouch-Zonetouch-3-Thermostat-fig-2.png)
Quick Menu & Controls
You can access common ZoneTouch 3 features using the Quick Menu.
Adjusting Airflow for a Zone
The percentage sliding bar will revert to the tile button if other buttons are touched or no actions are taken for 5 seconds.
Setting a Program
A more advanced version of the Timer function is the Program function, letting you turn the airflow ON or OFF for your entire house or individual zones.
- Open the Quick Menu and select Programs.
- Programs
Turbo Zone
For high volumes of conditioned air in a single zone.
ZoneTouch’s Turbo Zone feature can condition a single zone quickly; or can be useful when there is a lot of activity and you need more conditioned air than normal.
- Open the Quick Menu and select System settings.
- Tap on Turbo Group and a drop-down menu will appear. Select which room you want a larger volume of air.
- To activate the Turbo function, tap on the button again.
The Turbo function cannot be programmed. It is activated manually when needed.
Setting up Favourites
ZoneTouch’s Favourites feature allows you to save your climate control scenarios.
- Open the Quick Menu and 1 select Favourites.
- Create up to four Favourite presets. Select whether 2 you want each zone ON or OFF.
- Give your Favourite(s) option a name and you’re good to go!
ZoneTouch 3 App
The ZoneTouch 3 App can be downloaded free of charge.
Install the ZoneTouch 3 App through the Apple App Store or Google Play Store.
After downloading the application, run the app to control.*
ZoneTouch 3 is compatible with
- iOS 10.0 and above
- Android 5.0 and above
ZoneTouch 3 console can only be connected to 2.4GHz network. Mobiles have to be on the same 2.4GHz as the console to run the ZoneTouch app.
System Settings
Setting Date & Time
Select time zone and set date and time.
- Open the Quick Menu and select System settings.
- Select Preferences. Select Set Date Time to set date, time and time zone from the pop up menu.
Console Colour
Choose the background colour to suit the home décor. There are six different colours available.
- Open the Quick Menu and 1 select System settings.
- Select Preferences. Select colour from the Display Theme drop down menu.
Naming your Zones
Zones are re referred t ed to as Gro as Groups in Systoups in Syem Settingsts.em Settings.
Customise ZoneTouch’s Zone Names to suit your home.
- Open the Quick Menu and select System settings.
- Select Group Names and edit individual Groups by tapping on the space provided to enter information.
To make it easy a preset name can be selected by selecting Name List.
Screen Lock
The Screen Lock protects your ZoneTouch 3 from potential damage caused by children playing with the console.
It is set from the Preferences page
- Open the Quick Menu and select System settings.
- Select Preferences, tick Screen Lock and choose a four digit password.
Now, when the console goes to sleep and turns blank, you can unlock it using the password.
Owner’s Name
Owner’s Name is used by the mobile app to distinguish between ZoneTouch systems. The maximum length for a name is 16 letters.
- Open the Quick Menu and select System settings.
- Select Preferences and edit Owner’s Name by tapping on the space provided to enter your details.
WiFi Setup
Connect your ZoneTouch 3 to WiFi.
- Go to WiFi Connection from the Quick Menu and the system will start scanning for nearby WiFi networks.
- Tick Connect to WiFi and select the WiFi network to be connected Input the correct password to connect. If it’s successful, the WiFi name will be shown with Connected.
If a WiFi connection is not required, tick Off.
Software Updates
- Please make sure the ZoneTouch 3 is connected to the home router or your hotspot which has internet access.
- If there is a red dot on the top right corner of Quick Menu, a new version software is available for update. Follow the red dot and prompts to update the system. If the update fails, please try it again.
Local Access Password Protection
When enabled, mobile devices connected to the same WiFi Network as ZoneTouch will need to use the password to use the App.
- Open the Quick Menu and select System settings.
- Select Preferences, tick Local Access Protection 2, and choose a password.
Troubleshooting
Problem meets solution
Problem | Suggested Action |
Dampers have no response when turned on or off | Check if LEDs on the main module light up for relevant zones when the zone dampers are being turned On/Off. If Green/Red LEDs are not ON for the respective zone, the main module may be faulty, replace it.
If there is response, there might be a faulty cable and the cable would have to be replaced. If the zone is still not functional then there might be a faulty damper motor. Check if the cable from touch-pad to the main control module is faulty. If it is a faulty cable, then replace the cable. Check Grouping and find out if the right zones have been assigned to the right groups and have been turned ON/OFF in Zoning section. |
Some zones cannot be turned off | Check if ‘Spill’ status is displayed for the zone. Opening other zones will rectify the error |
No display on the LCD | Check if the cable is plugged in properly. Unplug the cable and reconnect it.
Check if there is power to the unit. |
Specifications
Electrical Requirements
- Power supply: 24V AC ±10%
- Line frequency: 50 Hz
Environmental Requirements
- Operating Temperature: 0°C to 60°C
- Altitude: 0 to 2000 meters
- Operating relative humidity: 10% to 80%
Zone Output
- Output voltage: 24VAC, 50Hz
- Current: 200mA (1 damper motor)
Transformer
- Input Voltage: 240VAC, 50Hz
- Output Voltage: 24VAC, 50Hz
- Wattage: 40W
- Fuse Dimension 5×20 mm, Fast-Acting 2A, 250V
Liability and Disclaimer
All specifications and procedures are correct at time of publication, but are subject to change without notice. Please read the instructions before installing this Zone Control System. Polyaire Pty Ltd does not accept any responsibility for loss or damage that may occur as a result of the incorrect installation or operation of this AirTouch Control System.
Polyaire Pty Ltd 11-13 White Road Gepps Cross South Australia, 5094
- Tel: (08) 8349 8466
- Fax: (08) 8349 8446
© Polyaire Pty Ltd 2021 Edition 1, April 2021
Like us on Facebook at ‘facebook.com/meetAirTouch Subscribe to us on YouTube at ‘AirTouch’
REFERENCE
Download Manual
Airtouch Zonetouch 3 Thermostat User Manual
Leave a Reply