VTech E-Smart W960 Wireless Thermostat Product Specification Guide

Contents hide

VTech E-Smart W960 Wireless Thermostat

Sustainable solution which can reduce your heating and cooling related energy consumption by up to 30%
Elegant industrial design
Standalone energy management
Compatible with most wired HVAC systems
Occupancy detection
E-Smart configuration tool
ZigBee 3.0 compatible
Antibacterial coating tested to inhibit 99.9% of bacteria growth
1-year limited warranty

SYSTEM APPLICATION

Improve PTAC/VTAC energy management and reduce maintenance costs with this easy to install wireless thermostat
Place anywhere in the guest room without the need for wiring or an electrician
Smart, in-room energy management system with occupancy detection optimizes energy usage
Networked energy management system optimizes in-room energy usage
Controller card mounts directly to the PTAC chassis and connects with the included wire harness
Wirelessly communicates with the thermostat

WIRELESS THERMOSTAT SPECIFICATIONS

Product Dimensions	3.4″ x 3.4″ x 0.9″ (8.6cm x 8.6cm x 2.3cm)
Mounting Type	Surface Mount
HVAC System	PTAC/VTAC/Heat Pump
Power Requirements	Alkaline Batteries (4 AAA)
Display	1.3″ (128 x 64) OLED
Number of Keys	4 Touch Keys
LED Indicator	1, Red
Temperature Range	33-99°F (+/-1°F) / 1-37°C (+/-0.5°C)
Occupancy Sensing	Maximum Detection Distance: 9m, Maximum Detection Angle: 120°
Diagnostic Connection	USB-Type C
RF Interface	ZigBee 3.0, Frequency Band: 2.4GHZ
APP System	Android 8.0 or higher
Battery Life	24 Months
Approvals	UL62368-1; FCC Part 15B; Part 15.247; Part 15.249

CARTON DIMENSIONS

CONTROLLER CARD SPECIFICATIONS

Product Dimensions	3.9”x2.4”x1” (10cm x 6.0cm x 2.4cm)
Mounting Type	Double-sided tape
HVAC System	PTAC/VTAC/Heat Pump
Power Requirements	Input 24V AC ~50/60Hz 0.5A with “C” common wire
Recommended Wire	24 Gauge
Number of Keys	1 Pair Button
LED Indicator	1, Dual Color
Outputs	Output 0.5A MAX @24VAC
RF Interface	ZigBee 3.0, Frequency Band: 2.4GHZ
APP System	Android 8.0 or higher
Approvals	UL60730-1;UL60730-2-9; FCC Part 15B; Part 15.247; Part 15.249

CONTROLLER CARD INSTALLATION – WIRING TABLE

WIRE COLOR	CONVENTIONAL SYSTEM	HEAT PUMP SYSTEM
Black	C – 24VAC Common Wire	C – 24VAC Common Wire
Red	R – 24VAC Power	R – 24VAC Power
Yellow	Y1 or W3 – 1ST Stage of Compressor Relay/3RD Stage of Heat Relay	Y1 – 1ST Stage of Compressor Relay
White	W1 – 1ST Stage of Heat Relay	W1 or Y2 – Aux Heat/1ST Stage of Heat/2ND Stage of Compressor Relay
Orange	O/B or W2 – Not Used/2ND Stage of Heat Relay	O/B – Changeover Valve Relay
Green	GH – Fan Relay, High	GH – Fan Relay, High
Purple	GL – Fan Relay, Low	GL – Fan Relay, Low
Brown	AUX – Occupancy Out	AUX or E – Occupancy Out/Emergency Heat