Use with most Air Conditioning & Heating Systems including 1 or 2 Stage Electric Cooling & 2 Stage Gas Heating, Heat Pump, Electric or Hydronic Heat.
CAUTION Follow Installation Instructions carefully. DISCONNECT POWER TO THE HEATER – AIR CONDITIONER BEFORE REMOVING THE OLD THERMOSTAT AND INSTALLING THE NEW THERMOSTAT.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
PREPARATION
Assemble tools & recommended
REMOVE & REPLACE OLD THERMOSTAT
WIRE CONNECTIONS
If the terminal designations on your old thermostat do not match those on the new thermostat, refer to the chart below, or the wiring diagrams that follow.
5 Wire, 1 Stage Cooling, 1 Stage Gas Heat
Residential Gas or Electric Heat*, Electric Cool, split systems & package units
If using first stage electric heat, this option must be selected ON (see page 13, step 5 of Owner’s Manual).
4 Wire, 1 Stage Cooling, 1 Stage Gas Heat
Residential Gas or Electric Heat*, Electric Cool, split systems & package units.
If using first stage electric heat, this option must be selected ON (see page 13, step 5 of Owner’s Manual).
6 Wire, 2 Stage Cooling, 1 Stage Gas Heat
Residential two stage cooling with Gas or Electric Heat*.
Note: If using first stage electric heat, this option must be selected ON (see page 13, step 5 of Owner’s Manual).
6 Wire, 1 Stage Cooling, 2 Stage Heat
Residential & commercial 1 Stage Cooling, with 2 Stage Gas or Electric Heat.
If using first stage electric heat, this option must be selected ON (see page 13, step 5 of Owner’s Manual).
7 Wire, 2 Stage Cooling, 2 Stage Heat
Commercial Gas or Electric Heat *, Electric Cool, split systems & package units including Commercial Heat Pumps.
If using first stage electric heat, this option must be selected ON (see page 13, step 5 of Owner’s Manual). ** Commercial heat pumps do not have the heat pump turned ON in advanced setup (see page 12, step 3 of Owner’s Manual).
5 Wire, 1 Stage Cooling, 1 Stage Heat-Heat Pump* with O or b reversing valve.
Residential Heat Pumps, split systems & package units, with no auxiliary heat.
This option must be selected ON during advanced setup (see page 12, step 3 of Owner’s Manual).
This option must be selected O or b during advanced setup (see page 13, step 4 of Owner’s Manual).
6 Wire, 1 Stage Cooling, 2 Stage Heat-Heat Pump* with O or b reversing valve.
Residential Heat Pumps, split systems & package units, with auxiliary heat.
This option must be selected ON during advanced setup (see page 12, step 3 of Owner’s Manual).
This option must be selected O or b during advanced setup (see page 13, step 4 of Owner’s Manual).
TEST OPERATION
Download Manual
Venstar T1100FS Programmable Thermostat Installation Instructuion
OTHER MANUAL
Venstar T1100FS Programmable Thermostat Owner Manual
Venstar T1100FS Programmable Thermostat Installation Instructuion
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…