Tado 230 V Smart Thermostat Installational Manual

Tado 230 V Smart Thermostat

Optional Accessory

Do not use the tado° relay to switch the main electrical supply to the boiler!

CAUTION: High voltage cables Make sure to turn the power off before you start.

Use the tado° Trim Plate behind the Smart Thermostat or Extension Kit if needed. This can be obtained separately at tado.com/trim-plate.

Wiring: Smart Thermostat

Combi Boilers (Dry Contacts)
Wired Setup: Smart Thermostat is wired directly to the boilerThe Smart Thermostat can also be installed wirelessly when the Extension Kit is wired (p. 7-9)

Combi Boilers (Dry Contacts)

Wireless Setup: Smart Thermostat installed wirelessly with receiver

S-Plan Setups (Switched Live)

Wireless Setup: Smart Thermostat installed wirelessly with receiver

Y-Plan Setups (Switched Live)

Wireless Setup: Smart Thermostat installed wirelessly with receiver

Connect Internet Bridge to Router

Pair Extension Kit with Internet-Bridge

Wireless Setup: Smart Thermostat installed wirelessly with receiver

If failed:
Restart pairing and make sure that the distance between the devices is at least 3 m while pairing

Pair Smart Thermostat with Internet-Bridge

If failed:

• Press the button to clear the error
• Restart pairing and make sure that the distance between the devices is at least 3 m while pairing

Open Installer MenuIf failed:

• Repeat the process to open Installer Menu
• Make sure that the distance between the devices is at least 3 m while loading the menu

Configuration

Get expert advice on the tado° installer hotline:
020 3893 2159
or at
tado.com/installers

REFERENCE

DOWNLOAD MANUALS

Tado 230 V Smart Thermostat Installational Manual

Tado 230 V Smart Thermostat Installational Manual