Saswell SAS6000UTK-7 Wi-Fi Thermostats Operating instruction

Saswell SAS6000UTK-7 Wi-Fi Thermostats

This manual applies for SAS6000UTK-7-WIFI, used with Single Stage, Multi-Stage, and Heat pumps, and has a mobile control function.

SPECIFICATION

• Power Supply ……………………… Dual Power 24VAC (18-30VAC,50/60Hz) or Battery Powered
• Terminal Load…………………………1.0 A per terminal, 2.0A maximum total load
• Set point Temperature Range………….41℉ to 95℉(5℃ to 35℃)
• Operating Ambient…………………….32℉ to 122℉ (0℃ to 50℃)
• Operating Humidity……………………90% non-condensing max
• Shipping Temperature Range…………. 14℉ to +140℉ (-10℃ to 60℃)
• Dimensions……………………………. 5.9 inch×4.5 inch×1.2inch(150mm×115mm ×32mm)
• Color……………………………………White

FEATURE

• Apply with various kinds of heating and cooling systems.
• Including Single stage, Multi-stage, And Heat Pumps (Up to 3-stage heat, 2-stage cool, with Aux. Or Emergency heat)
• Large LCD display with backlight, continuous backlight option
• Menu Driven Programming
• The screen displays the set temperature, the room temperature, and the current time simultaneously
• Fan switch with on and auto
• Auto change over
• Permanent user setting retention during power loss, no batteries are required,
• Optional 7-day programming and non-programmable
• Optional temperature display of Celsius or Fahrenheit scale
• Both Vacation mold and hold duration modes are available for comfort and energy saving
• Air filter change indicator
• UV light change indicator

IMPORTANT SAFETY INFORMATION

• Always turn off power at the main power source by unscrewing the fuse or switching the circuit breaker to the off
  position before installing, removing, cleaning, or servicing this thermostat.
• Read all of the information in this manual before installing this thermostat.
• Only a professional contractor should install this thermostat.
• All wiring must conform to local and national building and electrical codes and ordinances.
• Use this thermostat only as described in this manual.

KEYBOARD, DISPLAY, AND SWITCH DESCRIPTION
Touch Screen Thermostat

Home Screen Description

1. Press day(s) to set the program schedule
2. “Hold Until” indicates the time when a temporary hold period will end
3. Press to select the system type
4. Press to select fan operation
5. Press “MENU” to display the first function menu of the button (6) (7) (8) (9) (10)
   Press “DONE” to confirm the current setting
6. Press “SET TIME” to set the current time clock
   Press “INFO” to check outside temperature or inquiry for the count back time for changing filter or inquiry for UV light duration hours.
7. Press “RUN SCHED” to resume the program operation
   Press “RESET” to the current program setting or current configuration setting to the factory default value
   Press “CONFIG” to set the configuration menu item
8. Press “HOLD” to permanently hold the current set point
   Press “CLEAN DISPLAY” for entering a 30-second count back time for cleaning the display
   Press “PREVIOUS STEP” for going back to the last configuration menu item
9. Press “SET SCHED” for setting a schedule for each day of the week
   Press “NEXT STEP” for going forward to the next configuration menu item or the next day of the week when setting a schedule.
10. Press “OTHER” for entering the second function menu of (5) (7) (8) (10) Press “CANCEL” to disregard the current setting and go back to the last operation
11. Press “WAKE” “LEAVE” “RETURN” and “SLEEP” to choose the 4 setting period of each day when setting the program schedule
12. Press UP and DOWN for modifying the set point
13. “Days” displays during steps in setting vacation duration days or counting back days of vacation duration days
    “Am” indicates the current time clock is in the morning. “Pm” indicates current time clock is in the afternoon
14. Press UP and DOWN for setting the current time clock or setting time in programming or changing
    selections in the configuration menu or setting the time when a temporary hold period will end
15. “Emergency” flashes when system mode is set to “EMER”
    “ Using Schedule” displays when the thermostat is operating under presetting schedule
    “ Permanent Hold” displays when the thermostat is in permanent hold setting the temperature period
    “ Temporary Hold” displays when the thermostat is in a temporary hole setting the temperature period
16. displays when first-stage cooling activate
    displays when both first-stage cooling and second-stage cooling activate
17. displays when first-stage heating activate
    displays when both first stage heating and second heating activate
18. displays when Auxiliary heating or Emergency heating activate
19. displays when circulating fan activate
20. “TECHNICIAN SET UP: USE UP AND DOWN FOR CURRENT SELECTION AND NEXT STEP PREVIOUS
    STEP KEY TO THE NEXT PREVIOUS STEP” displays to help the technician how to operate in configuration mode
21. Indicate the current status of the thermostat
22. “Chg Filter” displays indicate changing the filter count back has expired
23. “Comp Dly” displays when compressor delay lockout activate
24. “Chg UV” displays when changing UV duration days have expired

Direct switch AP mode: Long Press System Switch from direct connect to AP mode, from WIFI switch to AP display. When the battery is powered alone, the WIFI function fails, When the external power supply is, the WIFI Function effectively.

INSTALLATION

1. Pull the thermostat body off the thermostat base. Forcing or prying on the thermostat will cause damage to the unit.
2. Place base over the hole in wall and mark mounting hole locations on the wall using the base as a template
3. Move base out of the way. Drill mounting holes. If you are using existing mounting holes and the holes drilled
   are too large and do not allow you to tighten the base snugly, use plastic screw anchors to secure the base.
4. Fasten base snugly to wall using the mounting holes shown in Figure 3 and two mounting screws. Leveling is for
   appearance only and will not affect thermostat operation.
5. Connect wires to the terminal block on base using the appropriate wiring schematic (See Figure 5、Figure 6)
6. Carefully line the thermostat up with the base and snap it into place

Battery Location
Batteries are optional (to provide backup power) if your thermostat was wired to run on AC power when installed.

Battery replacement
Install fresh batteries immediately when the Low Batt warning begins flashing. The warning flashes about 60 days before batteries are depleted. Even if the warning does not appear, you should replace batteries once a year, or before leaving home for more than 1 month To replace batteries, set the system to OFF, remove the thermostat from wall and install the batteries in the rear along the top of the thermostat. (See figure 4)

WIRING DIAGRAM

Wiring Guide

RC	1H/1C System（1 transformer） Power 【1】	RC	1H/1C System（2 transformer） Power (cooling transformer) 【1,2】
RH	(RH+RC joined by jumper)	RH	Power (heating transformer) 【1,2】
W	Heat Relay	W	Heat relay
Y	Compressor contactor	Y	Compressor contactor
G	Fan relay	G	Fan relay
C	24VAC common	C	24VAC common
S1/S2	Remote sensor	S1/S2	Remote sensor

RC	Power 【1】		RC	Power 【1,2】
RH	(RH+RC joined by jumper)		RH	(RH+RC joined by jumper) 【 1,2 】
W	Heat relay 1		W	Heat relay 1
Y	Cool relay 1		Y	Cool relay 1
W2	Heat relay 2		W2	Heat relay 2
Y2	Cool relay 2		Y2	Cool relay 2
G	Fan relay		G	Fan relay
C	24VAC common		C	24VAC common
S1/S2	Remote sensor		S1/S2	Remote sensor

RC	Power 【1】		RC	Power 【1,2】
RH	(RH+RC joined by jumper)		RH	(RH+RC joined by jumper) 【1,2】
Y	Compressor relay		Y	Compressor relay
O/B,O:	Changeover valve energized in heating		O/B,O:	Changeover valve energized in heating
B:	Changeover valve energized in cooling		B:	Changeover valve energized in cooling
G	Fan relay		Y2	Compressor 2 relay
C	24VAC common		G	Fan relay
S1/S2	Remote sensor		C	24VAC common
			S1/S2	Remote sensor

L	Equipment monitor 【5】		L	Equipment monitor 【5】
RC	Power 【1】		RC	Power 【1】
RH	(RH+RC joined by jumper)		RH	(RH+RC joined by jumper)
Y	Compressor relay		Y	Compressor relay
E	Emergency heat relay 【6】		E	Emergency heat relay 【6】
Aux	Auxiliary heat relay (Heat 2) 【6】		Aux	Auxiliary heat relay (Heat 2) 【6】
O/B,O:	Changeover valve energized in heating		O/B,O:	Changeover valve energized in heating
B:	Changeover valve energized in cooling		B:	Changeover valve energized in cooling
G	Fan relay		Y2	Compressor relay 2
C	24VAC common		G	Fan relay
S1/S2	Remote sensor		C	24VAC common
			S1/S2	Remote sensor

1. Power supply
2. Remove jumper for 2-transformer system
3. Optional 24VAC common connection
4. The common connection must come from the cooling transformer
5. If the L terminal is used, 24VAC common (terminal C) must be connected
6. Install field jumper between Aux and E terminals if there is no emergency heat relay

CONFIGURATION MENU

The configuration menu allows you to set certain thermostat operating characteristics to your system or personal requirements. To enter the configuration menu, switch off the thermostat

1. Press MENU for displaying the main menu button, Press OTHER to display another menu button
2. Press CONFIG for entering the configuration menu, and change the setting according to the following figure. For resume the factory default setting, press RESET and then confirm by pressing DONE.
   

1 H	2H	HP1	HP2	Press	Display factory default	Press Up and DOWN To select	Comments
			1	NEXT STEP	SYSTEM (2H)	1H,2H,HP1,HP2	Select control system
				NEXT			HA: Gas heating, Furnance controls blower HE: Electric heating. Thermostat controls blower
			2	STEP	BLowER (HA)	HA,HE
NA	NA		3	NEXT STEP	AxMOdE	HA,HE	HA: Fossil fuel backup heat HE: Electric backup heat
			4	NEXT STEP	CHANGE (0)	0,1	0: Manual changeover 1: Auto changeover
			5	NEXT STEP	DbaNd(3)	2,3,4,5,6,7,8,9	Auto changeover dead band
			6	NEXT STEP	RECVRY (OFF)	OFF/ON	Intelligent Recovery operation
			7	NEXT STEP	HCYCLE (FA)	FA, SL	First heating cycle rate

			8	NEXT STEP	CCYCLE (FA)	FA, SL	First cooling cycle rate
NA	NA		9	NEXT STEP	EMER (FA)	FA, SL	Emergency heating rate
			10	NEXT STEP	DELAy (5)	0,5	Select compressor lockout   delay
			11	NEXT STEP	LIGHT (2)	1,2, 3	Select backlight display
			12	NEXT STEP	CALIbR (0)	+4 TO -4	Select Temperature   Calibration
			13	NEXT STEP	F OR C (F)	F or C	Select ºF or ºC Readout
			14	NEXT STEP	PRGM (7)	0,7	7: 7-day program 0: non-program
NA			15	NEXT STEP	H2SP (FA)	FA, SL	Select second stage heating   rate
NA		NA	16	NEXT STEP	C2SP (FA)	FA,SL	Select second stage cooling   rate

			17	NEXT STEP	FILTER (00)	00 – 12	Select filter replacement run   time
			18	NEXT STEP	UVLAMP (UF)	UO or UF	Select UV lamp replacement run time
			19	NEXT STEP	CLOCK (24)	24,12	Selection of time scale
			20	NEXT STEP	SENSOR (0)	0,1,2,3	Remote sensor option
NA	NA		21	NEXT STEP	HPLOCK (0)	0,15,20,25,30,35,4 0℉	Heat pump compressor lockout option
NA	NA		22	NEXT STEP	AxLOCK (0)	0,40,45,50,55,60 ℉	Heat pump auxiliary lockout option
			23	NEXT STEP	VOICE (yES)	YES,No	Select audible beeper On/off
			24	NEXT STEP	LOCK (unL)	PAL,unL,FUL	Select keypad lockout option
			25	NEXT STEP	o/b(o)	o,b	Select Changeover valve   output

System type option

1H: 1 heat/1 cool conventional 2H: 2 heat/2 cool conventional HP1: 1 compressor heat pump
HP2: 2 compressors or 2-speed compressor heat pump

Fan control option
HA: Gas heating. Furnace controls blower
HE: Electric heating. Thermostat controls blower

Auxiliary heat type option
This option apply only to HP1 or HP2 setting in system type option HA: Fossil fuel backup heat
HE: Electric backup heat

Manual/Auto changeover option
0: Manual changeover
1: Auto changeover

 Auto changeover dead ban option
Option: 2~9℉, the factory default setting is 3℉, which means the cooling set temperature must be 3℉ higher than the heating set temperature if the Manual/Auto changeover option is selected at 1 and the SYSTEM button is set at AUT.

 Intelligent Recovery operation
The thermostat has an intelligent recovery function that brings your room temperature to the set temperature at exactly the pre-set time by turning on the heating earlier. Select ON to activate the intelligent recovery function, Select OF to deactivate the intelligent recovery function. The intelligent recovery function doesn’t activate when programming setting to non-programmable.

First heating cycle rate
FA: Fast rate, heating will activate 0.6℉ below set point
SL: Slow rate, heating will activate 1.2℉ below set point

First cooling cycle rate
FA: Fast rate, cooling will activate 1.2℉above set point
SL: Slow rate, cooling will activate 1.7℉ above set point

Emergency heat cycle rate
This option apply only to HP1or HP2 setting in the heating type option
FA: Fast rate, Emergency will activate 1.2 ℉ below set point
SL: Slow rate, Emergency heat will activate 1.7℉ below set point

Select compressor lockout delay
To protect the compressor from short cycling, you can select a compressor’s off-time cycle between 0 or 5 minutes.
When the thermostat compressor time delay occurs, “Comp Dly” display during compressor lockout.

Select display backlight
The display backlight improves display contrast in low-lighting conditions. Select 1 for NO backlight display. Select 2 for the backlight to come on for approximately 30 seconds when any button of the thermostat is touched. Select 3 for the backlight to remain on continuously.
NOTE: When operated from batteries (No “C” terminal connection, or if AC power goes off), the LCD continuous display of the backlight will be disabled.)

Select temperature recalibration
This feature allows you to adjust the displayed room temperature up to 4º higher or lower. Your thermostat can be accurately calibrated to match your previous thermostat. The current or adjusted room temperature will be displayed on the display.

Select ºF or ºC readout
Changes the display readout to Centigrade or Fahrenheit as required.

Program options
7: Select the 7-day program function for the thermostat
0: Select a non-program function for the thermostat

Select second-stage heating rate
This option apply only to HP1, HP2, 2H setting in system type option
FA: Fast second-stage heating rate. Second-stage heating will activate 1.5℉ below first-stage heating
SL: Slow second-stage heating rate. Second-stage heating will activate 2.5℉ below first-stage heating

 Select second stage cooling rate
This option applies only to HP2, 2H setting in the system type option
FA: Fast second-stage cooling rate. Second-stage cooling will activate 1.5℉ above first-stage cooling
SL: Slow second-stage cooling rate. Second-stage heating will activate 2.5℉ above first-stage cooling

 Select filter replacement run time
The thermostat will display the “Chg Filter” after a set time of operation. This is a reminder to change or clean
your air filter. This time can be set from 0 to 12 months in 1-month increments. Selection of 00 WILL CANCEL THIS
FEATURE. You can check the count back time and clear it by the following step

1. press the MENU button for displaying the main button
2. dress another button for displaying another button
3. Press INFO to inquiry for the count back changes filter time
4. when “Chg Filter” is displayed, RESET button will be shown when inquiry for count back time. Press RESET and then press DOWN to reset the timer. This resets the timer and starts counting the hours until the next filter change.

Select UV lamp replacement run time
This is a reminder to change the UV lamp. Select UF means you have canceled the feature. Select UO starts to count from 0 days to 400 days. The thermostat will display “Chg UV” when UV time (400 days) has expired. You can check the duration run time and clear it by the following step

1. Press the MENU button for displaying the main button
2. Press another button for displaying another button
3. Press INFO to inquire about the UV duration time. If displays show the counter back time of filter change replacement. Press INFO again, and UV duration time will appear.
4. When “Chg UV” is displayed, the RESET button will be shown when inquiring about the UV lamp duration time. Press
   RESET and then press DOWN to reset the timer. This resets the timer and starts counting the duration days

Selection of time scale
Select 12 for 12 hours display for the time clock and select 24 for 24 hours display for the time clock

Remote sensor option
0: No remote sensor
1: Outdoor sensor (display only). Assuming 1 is selected, if an optional outdoor sensor is installed, INFO will display in the Home screen. Press INFO for inquiry for the outside temperature.
2: Outdoor control sensor (See Menu item 21 Heat pump temperature lockout)
3: Indoor sensor. If 3 is selected and the thermostat is installed with an indoor remote sensor, the display will show the read temperature from the indoor sensor.

 Heat pump compressor lockout temperature
This option applies only to HP1 HP2 setting in the system type option and only works when the remote sensor option (menu item 20) is set 2.
0: No heat pump compressor lockout 15,20,25,30,35,40℉: heat pump compressor lockout temperature With fossil-fuel backup (See menu item 3. Auxiliary heat type option). If the thermostat is installed with an optional outdoor sensor, you can select the compressor lockout temperature. When the outdoor temperature is below the compressor lockout temperature, only the auxiliary heat operates. When the outdoor temperature is above the compressor lockout temperature, only the compressor operates. With electric heat backup (See menu item 3. Auxiliary heat type option). If the thermostat is installed with an optional outdoor sensor, you can select the compressor lockout temperature and /or an auxiliary heat lockout temperature. (See menu item 22) When the outdoor temperature is below the compressor lockout temperature, only the auxiliary heat operates. When the outdoor temperature is above the auxiliary lockout temperature, only the compressor operates. If the outdoor temperature is between the compressor and auxiliary lockout temperatures, both the compressor and auxiliary heat can operate.

Heat pump auxiliary heating temperature lockout option
This option applies only to HP1 HP2 setting in the system type option and only works when the remote sensor option (menu item 20) is set 2.
0: No auxiliary heating temperature lockout 40,45,50,55,60℉: heat pump auxiliary heating temperature lockout. ( See menu item 22 explains how it works)

 Select audible beeper On/off
Select YES, the thermostat will beep when any button touched
Select NO, the thermostat will turn off the voice

 Select keypad lockout on or off
UnL-unlock. All keys are available. Screen is unlocked
PAL-partially locked. All key functions are locked except the SYSTEM key; temperature UP and DOWN keys and the
CANCEL key. Enter Configuration set up to unlock the screen
FUL-fully locked. The screen is fully locked except SYSTEM key. Enter Configuration set up to unlock the screen

O: Said in heating mode, O/B relay will be output, Heating is effective.
B: Said in Cooling mode, O/B relay will be output, Cooling is effective.

OPERATING YOUR THERMOSTAT

Choose the Fan Setting (Auto or On)
Fan Auto is the most commonly selected setting and runs the fan only when the heating or cooling system is on. Fan On selection runs the fan continuously for increased air circulation or to allow additional air cleaning Choose the System Setting (Cool, Off, Heat, Emer, Auto)
Press the SYSTEM button to select:
Heat: The thermostat controls only the heating system
Cool: The thermostat controls only the cooling system

Auto: Auto Changeover is used in areas where both heating and cooling may be required on the same day. When the SYSTEM button set to AUTO, the thermostat automatically selects heating or cooling depending on the indoor temperature if the AUTO changeover option is set to 1. (See configuration menu item 4). Heat and cool settings must be over the dead ban value which is set at Auto changeover dead ban (configuration menu item 5). If the heat and cool setting is lower than the dead ban, the thermostat will auto change to heat or cool according to the current set temperature and the dead ban setting. Emer: Emergency heat is available only when the thermostat is configured in HP1 or HP2 mode.

Manual Operation for Non-programmable Thermostats
Press the SYSTEM button to select Heat or Cool and Use the △or▽ buttons to adjust the temperature to your desired setting. After selecting your desired settings you can also press the SYSTEM button to select AUTO to allow the thermostat to automatically change between Heat and Cool if the AUTO changeover option is set to 1. (See configuration menu item 4)

Manual Operation for programmable thermostats
This operation applies only when the Program option (See configuration menu item 14) is set to programmable.

Press HOLD to permanently adjust the temperature. This will turn off the program schedule. Whatever temperature you set will be maintained 24 hours a day, until you manually change it, or press RUN SCHED to cancel “Hold’ and resume the program schedule.’

This feature can suspend the program schedule for an extended period of days. Press HOLD for 5 seconds. Press △ or ▽ to set the temperature you want, then press or ▽ to set the time of day you want to schedule to resume when you return. Whatever temperature you set will be maintained 24 hours a day for the number of days you select. After these numbers of days have elapsed, the previously programmed schedule will resume at the time you set.If you return earlier than expected, press RUN SCHED to resume the program schedule.

Inquiry about outside temperature
Press △or▽ immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. The new temperature will be maintained until the time you set. When the timer expires, the program schedule will resume and set the temperature to the level you’ve programmed for the current time period. To cancel the temporary setting at any time, press RUN SCHED. The program schedule will resume. When the remote sensor option is set to 1 or 2, INFO will display in the home screen. Press INFO for inquiring about the outside temperature. A thermostat will display the outside temperature.

This operation is only available when filter replacement time is set. Configuration menu item 17 explains the way for
inquiry for the count back time.

Inquiry for UV lamp duration time
This operation is only available when the UV lamp duration time is set. Configuration menu item 18 explains the way for inquiry for the UV lamp duration time.

Press CLEAN DISPLAY to lock the screen for cleaning. The screen will remain locked for 30 seconds so you can clean the screen without changing any settings. After 30 seconds, press DONE to resume normal operation, or press CLEAN DISPLAY again if you require more time for cleaning.
Note: Do not spray any liquid directly on the thermostat. Spray liquids onto a cloth, then use the damp cloth to clean the screen. Use water or household glass cleaner. Avoid abrasive cleaners

Screen lock
To prevent tampering, the screen can be partially or fully locked. Configuration menu item 24 explain the way to partially or fully locked the screen

Special feature
Intelligent Recovery: See configuration menu item 6- Intelligent Recovery operation.
Compressor protection: See configuration menu item 10- Select compressor lockout delay
Heat Pump Temperature Lockout: See configuration menu item 21-Heat pump compressor lockout temperature

PROGRAMMING
Set the Current Time clock and Day of the week

Press MENU for displaying the main menu button.
Press the SET TIME button to enter the clock-setting
Press the day to set the current day of the week. Press △ or▽ to adjust the minutes or hours. Press NEXT STEP to shift between setting minutes and setting hours.
Press DONE to save & exit (or press CANCEL to exit without changing the time).

Press the MENU button to display the main menu button. Press SET SCHED to enter set program mode. Select days to set the program schedule. It can be a single day the week or a group of days of the week Select HEAT or COOL for the program set by pressing the system button. To view the preset schedule, press the VIEW SCHED button.Select 4 different time period for setting program schedule.WAKE, LEAVE, RETURN, SLEEP. When viewing the program, you can view the preset program schedule by selecting the day and the time period.

Adjust time and set temperature for the selected time period by pressing △or▽
Press DONE to save and exit (or press CANCEL to exit without saving changes)
Press RESET and confirm by DONE to resume to factory default program schedule setting.

Factory Default Pre-program

The thermostat is programmed with the energy-saving settings shown in the table below for all days of the week. If this program suits your needs, simply set the thermostat clock and press the RUN button. The table below shows the factory-set heating and cooling schedule for all days of the week

	Wake Up (Morning)		Leave For Work (Day)		Return Home (Evening)		Go To Bed (Night)
Heating Program	6:00	70℉	8:00	62℉	17:00	70℉	22:00	62℉
Cooling Program	6:00	75℉	8:00	82℉	17:00	75℉	22:00	78℉

Planning Your Program
The Heating and Cooling Program schedules below allow you to pencil in your own program times and temperatures. Keep the following guidelines in mind when planning your program

• In Heating, lower temperatures will save energy
• In Cooling, higher temperatures will save energy
• If you plan on using Auto Changeover, set the heating temperature below the cooling set temperature for more than the value of pre-set dead ban (See configuration menu item 5).

Worksheet for Re-programming 7-day program

Heating Program	Wake Up (Morning)		Leave For Work (Day)		Return Home (Evening)		Go To Bed (Night)
Mon	6:00	70℉	8:00	62℉	17:00	70℉	22:00	62℉
Tue
Wed
Thu
Fri
Sat	6:00	70℉	8:00	62℉	17:00	70℉	22:00	62℉
Sun	6:00	70℉	8:00	62℉	17:00	70℉	22:00	62℉

CUSTOMER ASSISTANCE
After reading this guide, if you have any questions about the operation of your thermostat, please contact your installer Energy Utility company or service provider.

FCC Radiation Exposure Statement

The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

SASWELL GROUP(HK),LTD
Address: 3/F Building A, East 8th Region, Shangxue Industry & Science Park, Jihua Road, Shenzhen, Guangdong, China.  Tel: 86 755 61218393 ext 885 E-mail: amazon@saswell.com 

REFERENCE:

Download Manual:

Saswell SAS6000UTK-7 Wi-Fi Operating instruction

Saswell SAS6000UTK-7 Wi-Fi Operating instruction