Sangamo CHPRSTATDP Wireless Digital Programmable Thermostat Product Specification Guide

Sangamo CHPRSTATDP Wireless Digital Programmable Thermostat

General Information

Dimensions (mm)	140 x 88.6 x 32.1                                                             Number of Outputs			1
Finish	White Gloss                                                                   Output Relay Rating			3A
Call for Heat Indication	LCD Display		Output Type	Volt Free SPDT (Heating and Cooling Load)
Sensor Type	Electronic Sensor for Accurate and
	Responsive Performance
Materials	ABS
Warranty (Years)	3

Programming

Programming Schedule	24 Hour or 7 Days
Adjustment Type	Digital Programming with Digital Display
Set Temperature Range (°C)	5 to 35
TPI (Time Proportional & Integral) Control for Heating Efficiency	Yes
Temperature Display Range (°C)	0 to 50
Temperature Swing Adjustment (°C)	0.5 and 1
Optimisation	Optimum Start/ Delay Start and Optimum Stop for Additional Efficiency
Available Operations	Up to 6 per Day
Modes Available	3 (Permanent, Timed, and Temporary Override)
Pre-Programmed Schedule	Yes
Summer/Winter Time Change	Yes (Automatic)

Supply & Power

Wiring Type	2 Wire
Operating Voltage (V DC)	6
Maximum Cable Size (mm²)	1.5 (Flex), 2.5 (Fixed)
Other Power Source (Batteries)	4 x AAA Batteries
Battery Type	4 x AAA
Battery Low Indicator	LCD Display
EE Class	ErP Class IV
Class Description	TPI Room Thermostat, for use with ON/OFF Heaters, Value 2%

Environment

Operating Temperature (°C)	0 to +50
Frost Protection	Yes (5°C)

Sangamo

• Unit 7 T
• target Park, Shawbank Road, Lakeside, Redditch B98 8YN United Kingdom
• T: +44 (0)1527 515150
• F: +44 (0)1527 515143
• E: info@espuk.com
• W: espuk.com

Reference

Download Manual:

Sangamo CHPRSTATDP Wireless Digital Programmable Thermostat Product Specification Guide

Other Manual:

Sangamo CHPRSTATDP Digital Programmable Thermostat User Instructions

Sangamo CHPRSTATDP Digital Programmable Thermostat Installation Instructions

Sangamo CHPRSTATDP Wireless Digital Programmable Thermostat Product Specification Guide